OK, short update: the debug header works, I get some data at UART0. But there nothing else than CCCCCCC is printed, which means the SoC does not find a suitable boot-device (although MLO file is in place on microSD card). Any ideas what couls cause this?
On Sunday, November 26, 2017 at 4:38:13 PM UTC+1, [email protected] wrote: > > Ok, I played a bit more with it: on UART0 I do not get any data, neither > with a microSD card inserted (which contains my own MLO) nor without. Is > there anything additional neccessary to make it work? Even when there is > something wrong with my MLO, I would have expected some output on the > serial console. > > The MLO itself comes out of the StarterWare package, so it is a > self-compiled one which starts my bare metal application (which comes with > an other name). So...is there anything which has to be done different for > the PocketBeagle? It initialises a lot of peripherals, including SoC clock, > RAM timing and other things more... > >> >>> -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/315157a3-f03c-4952-9d88-1ac0f11b89c5%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
