I am feeling like an idiot here — this used to work a few months back, but I haven’t touched it in a while, and have done some system updates in the meanwhile.
I can’t seem to get config-pin to do anything useful for me: debian@beaglebone:~$ sudo config-pin P9-23 lo [sudo] password for debian: P9_23 pinmux file not found! WARNING: GPIO pin not exported, cannot set direction or value! bash: /sys/devices/platform/ocp/ocp*P9_23_pinmux/state: No such file or directory Cannot write pinmux file: /sys/devices/platform/ocp/ocp*P9_23_pinmux/state debian@beaglebone:~$ sudo /opt/scripts/tools/version.sh git:/opt/scripts/:[8e0b1e6f135ff3c30468f49a7a952c98be97219a] eeprom:[A335BNLTBWA51650BBWG4929] dogtag:[BeagleBoard.org Debian Image 2017-08-24] bootloader:[eMMC-(default)]:[/dev/mmcblk1]:[U-Boot 2017.09-rc2-00002-g84a7f2] kernel:[4.4.83-ti-r119] nodejs:[v6.12.0] uboot_overlay_options:[enable_uboot_overlays=1] uboot_overlay_options:[uboot_overlay_addr4=/lib/firmware/BB-SPIDEV0-00A0.dtbo] uboot_overlay_options:[uboot_overlay_pru=/lib/firmware/AM335X-PRU-RPROC-4-4-TI-00A0.dtbo] uboot_overlay_options:[enable_uboot_cape_universal=1] pkg:[bb-cape-overlays]:[4.4.20171126.0-0rcnee1~stretch+20171126] pkg:[bb-wl18xx-firmware]:[1.20170829-0rcnee1~stretch+20170829] pkg:[firmware-ti-connectivity]:[20170823-1rcnee0~stretch+20170830] debian@beaglebone:~$ uname -r 4.4.83-ti-r119 debian@beaglebone:~$ cat /etc/dogtag BeagleBoard.org Debian Image 2017-08-24 What am I missing? Thanks! -- Luke -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/A49FE0D0-17D8-4875-84B7-85332E1528C2%40canadensys.com. For more options, visit https://groups.google.com/d/optout.
