On Sunday, December 3, 2017 at 4:21:33 PM UTC+1, Graham wrote: > > The PocketBeagle, when powered only by the Vin input (P1-pin1) is > unstable. > This is the power supply input, normally assigned to the barrel jack in > the BBB, or the AC adapter input in the TI docs. > > Not to be confused with the Vi input (P1-pin7) which is connected to Vusb0 > and Vusb1 on the PocketBeagle. >
I'm not quite sure but isn't P1/7 the same as VDD on the BBB? In this case you definitely shouldn't use P1/1 for powering the board... -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/9de62b40-9e5c-459f-b258-8e500aa43a31%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
