I believe the GPS UART port could be used. PWM subsystem 0 would need to be configured for use similar to subsystems 1 and 2 which are used for on board drivers.
On Thursday, October 19, 2017 at 9:40:37 PM UTC-7, Unlisted wrote: > > I see there's a connector labeled LIPO and In looking at the specs for the > Beagle Bone Blue it states that this is for > > "2 cell (2S) LiPo battery connector " > > ( Short-Spec > <https://github.com/jadonk/beaglebone-blue/blob/master/docs/BeagleBone_Blue_ShortSpec.docx> > > and Schematic > <https://github.com/jadonk/beaglebone-blue/blob/master/BeagleBone_Blue_brd.pdf> > > ) > > Does that mean that in that connector, only 2 Cell LiPo batteries are > supposed to be used? > > What about wanting to have a battery operated robot with longer-lived > batteries and more power draw (e.g. motors)? Does that mean you need to > power the BBBlue via the barrel input and if so - then is it recommended > that you also have a 2 Cell LiPo battery connected to the LIPO connector? > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/6a3878b3-5cad-43b1-aef8-da714df1ae4d%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
