I downloaded the "latest" Stretch image (bone-debian-9.2-iot-armhf-2017-10-10-4gb.img.xz) and had ho issues moving my code to it and compiling it. But when I attach my hardware interface to P8 connector it won't boot.
I've edited the /boot/uEnv.txt file and un-commented: disable_uboot_overlay_emmc=1 but it made no difference. What am I missing? If I plug in my hardware after it boots and run my code all the /sys/class/gpio/gpio*/value and direction seem correct but it doesn't work, for example gpio39 (P8_04) value cats 0 and direction cats out, but a voltmeter on P8_04 reads 3.3V -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/bc4e513a-ec0b-41ba-bb8b-9e8e1ce20813%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
