MUCH MUCH better... The GPIO's all come up correctly. U-Boot 2018.01-rc1-00002-g965cb1b342 (Dec 06 2017 - 13:32:27 -0600), Build: jenkins-github_Bootloader-Builder-15
CPU : AM335X-GP rev 2.1 I2C: ready DRAM: 512 MiB No match for driver 'omap_hsmmc' No match for driver 'omap_hsmmc' Some drivers were not found Reset Source: Power-on reset has occurred. MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Using default environment Board: BeagleBone Black <ethaddr> not set. Validating first E-fuse MAC BeagleBone Black: Model: Element14 BeagleBone Black Industrial: BeagleBone: cape eeprom: i2c_probe: 0x54: BeagleBone: cape eeprom: i2c_probe: 0x55: BeagleBone: cape eeprom: i2c_probe: 0x56: BeagleBone: cape eeprom: i2c_probe: 0x57: Net: eth0: MII MODE cpsw, usb_ether Press SPACE to abort autoboot in 2 seconds board_name=[A335BNLT] ... board_rev=[EIA0] ... switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 ** Bad device 0:2 0x82000000 ** ** Bad device 0:2 0x82000000 ** switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... gpio: pin 56 (gpio 56) value is 0 gpio: pin 55 (gpio 55) value is 0 gpio: pin 54 (gpio 54) value is 0 gpio: pin 53 (gpio 53) value is 1 switch to partitions #0, OK mmc0 is current device gpio: pin 54 (gpio 54) value is 1 Checking for: /uEnv.txt ... Checking for: /boot.scr ... Checking for: /boot/boot.scr ... Checking for: /boot/uEnv.txt ... gpio: pin 55 (gpio 55) value is 1 2042 bytes read in 36 ms (54.7 KiB/s) Loaded environment from /boot/uEnv.txt Checking if uname_r is set in /boot/uEnv.txt... gpio: pin 56 (gpio 56) value is 1 Running uname_boot ... loading /boot/vmlinuz-4.4.91-ti-r137 ... 8889560 bytes read in 601 ms (14.1 MiB/s) uboot_overlays: [uboot_base_dtb=am335x-boneblack-uboot.dtb] ... uboot_overlays: Switching too: dtb=am335x-boneblack-uboot.dtb ... loading /boot/dtbs/4.4.91-ti-r137/am335x-boneblack-uboot.dtb ... 57290 bytes read in 262 ms (212.9 KiB/s) uboot_overlays: [fdt_buffer=0x60000] ... uboot_overlays: loading /lib/firmware/BB-BONE-eMMC1-01-00A0.dtbo ... 1105 bytes read in 107 ms (9.8 KiB/s) uboot_overlays: uboot loading of [/lib/firmware/BB-HDMI-TDA998x-00A0.dtbo] disabled by /boot/uEnv.txt [disable_uboot_overlay_video=1]... uboot_overlays: uboot loading of [/lib/firmware/BB-ADC-00A0.dtbo] disabled by /boot/uEnv.txt [disable_uboot_overlay_adc=1]... uboot_overlays: loading /lib/firmware/AM335X-PRU-UIO-00A0.dtbo ... 853 bytes read in 467 ms (1000 Bytes/s) uboot_overlays: loading /lib/firmware/univ-bbb-Exx-00A0.dtbo ... 92641 bytes read in 517 ms (174.8 KiB/s) loading /boot/initrd.img-4.4.91-ti-r137 ... 6259413 bytes read in 439 ms (13.6 MiB/s) debug: [console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 quiet] ... debug: [bootz 0x82000000 0x88080000:5f82d5 88000000] ... ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Ramdisk to 8fa07000, end 8ffff2d5 ... OK reserving fdt memory region: addr=88000000 size=83000 Loading Device Tree to 8f981000, end 8fa06fff ... OK Starting kernel ... Thanks! Dan On Wednesday, December 6, 2017 at 3:22:14 PM UTC-5, RobertCNelson wrote: > > On Wed, Dec 6, 2017 at 12:47 PM, Jose Valenzuela San Juan > <[email protected] <javascript:>> wrote: > > Is there a workaround while we wait for the fix? > > > > Looking forward for when its ready, I'm also working on an Element14 > > BeagleBone Black Industrial. > > Please let us know when ready. > > Okay, i found the issue and pretty sure it's resolved. > > Of course i can't find that board at my desk.. > > Plese run: > > cd /opt/scripts/tools/developers/ > git pull > sudo ./update_bootloader.sh --beta > sudo reboot > > and then share with us your serial boot log, so we can verify.. > > Then i'll move that version from "beta" to "normal".. > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/bb1d54d2-aac3-4581-9f4e-30b157cdb33a%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
