Hi Earl, On Mon, Dec 18, 2017 at 11:58 AM, Earl S <[email protected]> wrote:
> We released the Macchina M2, an Arduino-based car tinkering interface a > little while ago. M2’s interface board has 2X CAN, 1X SWCAN, 2X > LIN/ISO9141/K-Line, J1850, 6X 12v GPIO and more. In our latest experiment, > we replaced our processor board with the PocketBeagle and now we have an > awesome Linux based car tinkering platform! We are here to show it off, get > your feedback and find some people who want to help us test and improve it. > > We can always use an extra set of eyes on the design > <https://github.com/macchina/pocketbeagle-adapter-hardware/>. Let us know > what you think so far. If you are interested in playing with a beta unit, > reach out to us at [email protected] and let us know what you have in > mind. Here <http://docs.macchina.cc/pb_adapter/> is what we have so far > for documentation. Let us know if you have any other questions. > Your doc's look great! Is there anything else you needed in your base image? (can-utils is around 73.5kB so i'll just add that to the base iot image).. Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYgmO9GyYEQxt4nPLf-HmQCcr1E1KWQx-DNYKETcMDjb8w%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
