I CAN DO IT 在 2015年10月14日星期三 UTC+8上午5:41:01，Christopher Stack写道： > > Hello, > > I would like to disable the eMMC so I can use the additional GPIO lines. I > was following these instructions as they were the most succinct I was able > to find: https://github.com/modmaker/BeBoPr/wiki/BeBoPr-goes-Black. > However I found that the rstn command is no longer supported. Looking at > the U-boot code (I'm on the 2015.10.rc2 uboot) it appears that the rstn > command has became rst-function and has been firewalled behind > CONFIG_SUPPORT_EMMC_BOOT. > > > Is the best way for me to re-compile uboot with the CONFIG_SUPPORT_EMMC_BOOT > (and where does it need to go?) Or am I going down the incorrect path? > > Thanks, > > Chris >
-- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/b1550d4a-9584-4ad8-a45f-85f68c486427%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
