Follow this tutorial: https://elinux.org/Beagleboard:Updating_The_Software works great for me
Other informations: http://wiki.beyondlogic.org/index.php?title=BeagleBoneBlack_Upgrading_uBoot f the boot switch (S2) is held down during power-up, the ROM will boot from the SPI0 Interface first, followed by MMC0 (external uSD), USB0 and UART0. This allows the BeagleBone Black to bypass the onboard eMMC and boot from the removable uSD (provided no valid boot device is found on SPI0.) *This can be used to recover from a corrupted onboard eMMC/U-Boot.* Em quarta-feira, 17 de fevereiro de 2016 12:39:12 UTC-2, Jecika escreveu: > > Hello everyone, > > > > I have the same problem . I bought a BBB and tested it: at start up, the > USERS leds blinks. I have followed the instructions in the site > Beagleboard:Updating > The Software - eLinux.org. > <https://www.element14.com/community/external-link.jspa?url=http%3A%2F%2Felinux.org%2FBeagleboard%3AUpdating_The_Software> > > I unplagged the power supply and I keep pressed the S2 button (boot) (at > least 1 minute), I Applied the power to the board by plugging in the cable > (external power supply 5 V, 3 A). Only power led is on. > > When I pressed the power button for at least 8 seconds, the power led is > turned off then after 3-4 seconds it is turned on. > > > Could you please help me > > Le dimanche 18 août 2013 15:10:31 UTC+1, Gerald a écrit : >> >> Try here: >> >> http://circuitco.com/support/index.php?title=BeagleBoneBlack >> >> and >> >> http://circuitco.com/support/index.php?title=Updating_The_Software >> >> Gerald >> >> >> On Sat, Aug 17, 2013 at 10:52 PM, Carlos Eduardo Giuliani Baú < >> [email protected]> wrote: >> >>> Hello! >>> >>> After trying to boot with the power suply by USB, my beaglebone board >>> doesn´t lit any led, only the power led. I already tried press the reset >>> button for a few seconds and nothing work. >>> Any idea of how to fix it? >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> For more options, visit https://groups.google.com/groups/opt_out. >>> >> >> -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/9b24b4fa-854d-44d5-9524-44c517a6acd7%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
