On Sun, Jan 7, 2018 at 5:36 AM, <igor.shme...@hotmail.com> wrote: > Hello Folks! > > We are currently experimenting with the PocketBeagle CAN Connection but > haven't got much success yet. The PocketBeagle will be connected to a car. > To accomplish this we use a CAN Board > (https://www.waveshare.com/sn65hvd230-can-board.htm) in connection with a > step down converter and a OBD2 Male Connector. > > Our first thought was that we can use the dcan1 Pins (P2.09 for RX, P2.11 > for TX) to connect the hardware and just test everything with the socketcan > tool - without success. > > We then tried different Tutorials: > http://www.thomas-wedemeyer.de/beaglebone-canbus-python.html > http://www.instructables.com/id/DIY-Beaglebone-CAN-Bus-Cape/ > They didn't work either. > > Another problem is that there is almost no documentation on how to use the > PocketBealge CAN or maybe we just can't find it. > > Has someone got a good tutorial or hints how to use the CAN Pins correct? Do > we need the Device Tree Overlays? How can we test that a Device Tree Overlay > is working properly or something is connected to the CAN pins? > We are really thankful for any advise or solution!
https://github.com/beagleboard/pocketbeagle/wiki/Peripherals If you see any mistakes feel free to help improve ^ it.. Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYjXcAXRL8t2uCjAM6q_FRdabuv2%2BMQhcuCy-MxGsh3PfQ%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
