After successfully flashed the eMMC with latest (October 2017) Stretch IoT and by booting from eMMC, the system works fine, except for an error shown after boot (2-3 seconds after prompting for login):
beaglebone login: [ 48.493475] Error: Driver 'ecap' is already registered, aborting... [ 49.076151] Error: Driver 'ecap' is already registered, aborting... I assume I can live with that, but why occurs this error on a clean flash and how can be avoided ? Board is BBB rev. C, powered from a 5V / 4A supply, currently operated in remote console mode / serial terminal using the UART header & a 3.3V FTDI USB adapter. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/559737c9-2a0c-477a-a5bc-fda48e971026%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
