I'm guessing I was supposed to do this before rebooting the first time huh? Or is there a way to still access and change the /boot/uEnv.txt file now, since it's not booting? Note, I'm running from the on-board eeprom, not the SD card.
On Thu, Jan 11, 2018 at 6:08 PM, Robert Nelson <[email protected]> wrote: > On Thu, Jan 11, 2018 at 11:02 AM, Steve Heim <[email protected]> wrote: > > Hello, > > > > I've tried installing a xenomai-patched kernel, with the process > described > > below. Installation seems to go smoothly, then when I reboot the boot > > process keeps getting stuck, loops on the error "ipaddr not set" and > > eventually just doesn't go anywhere. I've got a bootlog (logged via > serial) > > here: https://pastebin.com/NFNqaH34 > > > > If anyone has any idea what's going wrong and can point me in the right > > direction, I'd very much appreciate it. > > 3.8.13 + U-Boot Overlays = Will Not Boot.. > > Disable U-Boot Overlays in /boot/uEnv.txt > > Change: > > enable_uboot_overlays=1 > > to > > #enable_uboot_overlays=1 > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAE_sPDFO9AQvJvEfSsKkeyOKO4WBCmp778mAR%2BmyW0h%2BEfJTOQ%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
