Hey,
thanks at first for the quick reply. The mentioned Images look a lot more
promising, but both of them won't show anything on hdmi after the orange
starting screen and will crash after some time with those messages:
[ 79.053771] INFO: rcu_sched detected stalls on CPUs/tasks:
[ 79.059295] (detected by 0, t=5252 jiffies, g=13836, c=13835, q=9)
[ 79.065612] All QSes seen, last rcu_sched kthread activity 5252
(-55236--60488), jiffies_till_next_fqs=1, root ->qsmask 0x0
I also tried a version from cristmas
(
https://rcn-ee.net/rootfs/bb.org/testing/2017-12-24/stretch-lxqt-xm/bbxm-debian-9.3-lxqt-xm-armhf-2017-12-24-4gb.img.xz
) which froze after booting to the login, also producing no output to the
hdmi.
Logs of attempts for all 3 version are attached.
Am Montag, 15. Januar 2018 20:43:24 UTC+1 schrieb RobertCNelson:
>
> On Mon, Jan 15, 2018 at 1:23 PM, <[email protected] <javascript:>>
> wrote:
> > Hi everyone,
> >
> > after having my Beagleboard xM collecting dust for quite some time I
> decided
> > to get back to it and give it some useful work. Unfortunally I don't
> even
> > get it to boot with the latest debian image.
>
> For the BB-xM grab either:
>
> For Jessie:
>
>
> https://rcn-ee.net/rootfs/bb.org/testing/2018-01-01/lxqt-xm-4gb/bbxm-debian-8.10-lxqt-xm-4gb-armhf-2018-01-01-4gb.img.xz
>
>
> For Stretch:
>
>
> https://rcn-ee.net/rootfs/bb.org/testing/2018-01-14/stretch-lxqt-xm/bbxm-debian-9.3-lxqt-xm-armhf-2018-01-14-4gb.img.xz
>
>
> Regards,
>
> --
> Robert Nelson
> https://rcn-ee.com/
>
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/4e076c21-1785-4dd6-a2da-dd2945247b9b%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
U-Boot 2018.01-rc2-00001-g5dd2fb5da6 (Dec 29 2017 - 09:59:01 -0600), Build:
jenkins-github_Bootloader-Builder-22
OMAP3630/3730-GP ES1.2, CPU-OPP2, L3-200MHz, Max CPU Clock 1 GHz
OMAP3 Beagle board + LPDDR/NAND
I2C: ready
DRAM: 512 MiB
NAND: 0 MiB
MMC: OMAP SD/MMC: 0
*** Warning - readenv() failed, using default environment
Beagle xM Rev C
No EEPROM on expansion board
No EEPROM on expansion board
OMAP die ID: 12a200029ff80000016842c815012008
Net: usb_ether
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
switch to partitions #0, OK
mmc0 is current device
SD/MMC found on device 0
Checking for: /uEnv.txt ...
Checking for: /boot/uEnv.txt ...
290 bytes read in 17 ms (16.6 KiB/s)
Loaded environment from /boot/uEnv.txt
Checking if uname_r is set in /boot/uEnv.txt...
Running uname_boot ...
loading /boot/vmlinuz-4.14.10-armv7-x4 ...
6779392 bytes read in 537 ms (12 MiB/s)
loading /boot/dtbs/4.14.10-armv7-x4/omap3-beagle-xm.dtb ...
100576 bytes read in 100 ms (981.4 KiB/s)
loading /boot/initrd.img-4.14.10-armv7-x4 ...
3365357 bytes read in 273 ms (11.8 MiB/s)
debug: [console=ttyO2,115200n8 root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait
coherent_pool=1M net.ifnames=0 quiet] ...
debug: [bootz 0x82000000 0x88080000:3359ed 0x88000000] ...
## Flattened Device Tree blob at 88000000
Booting using the fdt blob at 0x88000000
Loading Ramdisk to 89cca000, end 89fff9ed ... OK
Loading Device Tree to 89cae000, end 89cc98df ... OK
Starting kernel ...
[ 1.546142] dmi: Firmware registration failed.
[ 2.171203] tfp410 encoder0: failed to parse PD gpio
[ 2.176971] connector-dvi connector0: failed to find video source
[ 2.185485] Error: Driver 'tfp410' is already registered, aborting...
[ 2.367950] ehci-omap 48064800.ehci: Can't get PHY device for port 1: -517
[ 2.460876] dmi-sysfs: dmi entry is absent.
[ 2.484374] omap2_set_init_voltage: unable to find boot up OPP for vdd_core
[ 2.491546] omap2_set_init_voltage: unable to set vdd_core
Loading, please wait...
fsck: error 2 (No such file or directory) while executing fsck.ext4 for
/dev/mmcblk0p2
fsck exited with status code 8
[FAILED] Failed to start Load Kernel Modules.
See 'systemctl status systemd-modules-load.service' for details.
Starting Apply Kernel Variables...
Mounting FUSE Control File System...
Mounting Configuration File System...
[ OK ] Started Create Static Device Nodes in /dev.
[ OK ] Started Apply Kernel Variables.
[ OK ] Mounted FUSE Control File System.
[ OK ] Mounted Configuration File System.
Starting udev Kernel Device Manager...
[ OK ] Started Journal Service.
[ OK ] Started udev Kernel Device Manager.
Starting LSB: Set preliminary keymap...
Starting LSB: Tune IDE hard disks...
[ OK ] Started LSB: Set preliminary keymap.
Starting Remount Root and Kernel File Systems...
[ OK ] Started Remount Root and Kernel File Systems.
Starting udev Coldplug all Devices...
Starting Load/Save Random Seed...
[ OK ] Reached target Local File Systems (Pre).
[ OK ] Reached target Local File Systems.
Starting Raise network interfaces...
Starting Flush Journal to Persistent Storage...
[ OK ] Started LSB: Tune IDE hard disks.
[ OK ] Started Load/Save Random Seed.
[ OK ] Started Flush Journal to Persistent Storage.
Starting Create Volatile Files and Directories...
[ OK ] Started Create Volatile Files and Directories.
Starting Update UTMP about System Boot/Shutdown...
Starting Network Time Synchronization...
[ OK ] Started Update UTMP about System Boot/Shutdown.
[ OK ] Started Network Time Synchronization.
[ OK ] Reached target System Time Synchronized.
[ OK ] Started udev Coldplug all Devices.
[ OK ] Reached target System Initialization.
[ OK ] Listening on node-red.socket.
[ OK ] Listening on cloud9.socket.
[ OK ] Listening on bonescript.socket.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[ OK ] Reached target Sockets.
[ OK ] Reached target Basic System.
Starting System Logging Service...
Starting Generic Board Startup...
Starting LSB: Start busybox udhcpd at boot time...
Starting Restore /etc/resolv.conf i...e the ppp link was shut down....
[ OK ] Started Entropy daemon using the HAVEGE algorithm.
[ OK ] Started D-Bus System Message Bus.
Starting Connection service...
[ OK ] Started Bonescript autorun.
Starting Login Service...
Starting BB WL18xx wlan0 Service...
Starting Cape Manager Service...
Starting Avahi mDNS/DNS-SD Stack...
[ OK ] Started Regular background program processing daemon.
[ OK ] Started Deferred execution scheduler.
[ OK ] Started Daily Cleanup of Temporary Directories.
[ OK ] Reached target Timers.
Starting LSB: Load kernel modules needed to enable cpufreq scaling...
[ OK ] Started System Logging Service.
[ OK ] Started Restore /etc/resolv.conf if...ore the ppp link was shut down..
[ OK ] Started BB WL18xx wlan0 Service.
[ OK ] Started Cape Manager Service.
[ OK ] Started LSB: Start busybox udhcpd at boot time.
[ OK ] Started Avahi mDNS/DNS-SD Stack.
[ OK ] Started Connection service.
[ OK ] Started Login Service.
[ OK ] Started LSB: Load kernel modules needed to enable cpufreq scaling.
Starting WPA supplicant...
Starting LSB: set CPUFreq kernel parameters...
Starting Hostname Service...
[ OK ] Started Raise network interfaces.
[ OK ] Started WPA supplicant.
[ OK ] Started Hostname Service.
[ OK ] Reached target Network.
[ OK ] Reached target Network is Online.
Starting LSB: Apache2 web server...
Starting LSB: Advanced IEEE 802.11 management daemon...
Starting /etc/rc.local Compatibility...
Starting OpenBSD Secure Shell server...
Starting Permit User Sessions...
[ OK ] Started LSB: set CPUFreq kernel parameters.
[ OK ] Started LSB: Advanced IEEE 802.11 management daemon.
[ OK ] Started /etc/rc.local Compatibility.
[ OK ] Started Permit User Sessions.
[ OK ] Started OpenBSD Secure Shell server.
Starting Light Display Manager...
[ OK ] Started Getty on tty1.
[ OK ] Started Light Display Manager.
[ OK ] Started LSB: Apache2 web server.
[ 43.118988] omap_ssi_port 4805a000.ssi-port: couldn't get cawake gpio
(err=-2)!
[ 43.302642] omap_ssi_port 4805b000.ssi-port: couldn't get cawake gpio
(err=-2)!
[ OK ] Stopped Light Display Manager.
Starting Light Display Manager...
[ OK ] Started Light Display Manager.
[ *** ] (2 of 3) A start job is running for dev-ttyS2.device (36s / 1min 30s)[
51.527404] OF: graph: no port node found in /ocp@68000000/isp@480bc000/ports
[ OK ] Found device /dev/ttyS2.
[ OK ] Started Serial Getty on ttyS2.
[ OK ] Stopped Light Display Manager.
Starting Light Display Manager...
[ OK ] Started Light Display Manager.
[ 76.389831] INFO: rcu_sched detected stalls on CPUs/tasks:
[ 76.395355] (detected by 0, t=5252 jiffies, g=13644, c=13643, q=84)
[ 76.401763] All QSes seen, last rcu_sched kthread activity 5252
(-55902--61154), jiffies_till_next_fqs=1, root ->qsmask 0x0
[ 76.413452] rcu_sched kthread starved for 5252 jiffies! g13644 c13643 f0x2
RCU_GP_WAIT_FQS(3) ->state=0x0 ->cpu=0
U-Boot 2018.01-rc2-00001-g5dd2fb5da6 (Dec 29 2017 - 09:59:01 -0600), Build:
jenkins-github_Bootloader-Builder-22
OMAP3630/3730-GP ES1.2, CPU-OPP2, L3-200MHz, Max CPU Clock 1 GHz
OMAP3 Beagle board + LPDDR/NAND
I2C: ready
DRAM: 512 MiB
NAND: 0 MiB
MMC: OMAP SD/MMC: 0
*** Warning - readenv() failed, using default environment
Beagle xM Rev C
No EEPROM on expansion board
No EEPROM on expansion board
OMAP die ID: 12a200029ff80000016842c815012008
Net: usb_ether
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
switch to partitions #0, OK
mmc0 is current device
SD/MMC found on device 0
Checking for: /uEnv.txt ...
Checking for: /boot/uEnv.txt ...
290 bytes read in 17 ms (16.6 KiB/s)
Loaded environment from /boot/uEnv.txt
Checking if uname_r is set in /boot/uEnv.txt...
Running uname_boot ...
loading /boot/vmlinuz-4.14.10-armv7-x4 ...
6779392 bytes read in 537 ms (12 MiB/s)
loading /boot/dtbs/4.14.10-armv7-x4/omap3-beagle-xm.dtb ...
100576 bytes read in 100 ms (981.4 KiB/s)
loading /boot/initrd.img-4.14.10-armv7-x4 ...
3365357 bytes read in 273 ms (11.8 MiB/s)
debug: [console=ttyO2,115200n8 root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait
coherent_pool=1M net.ifnames=0 quiet] ...
debug: [bootz 0x82000000 0x88080000:3359ed 0x88000000] ...
## Flattened Device Tree blob at 88000000
Booting using the fdt blob at 0x88000000
Loading Ramdisk to 89cca000, end 89fff9ed ... OK
Loading Device Tree to 89cae000, end 89cc98df ... OK
Starting kernel ...
[ 1.546142] dmi: Firmware registration failed.
[ 2.171203] tfp410 encoder0: failed to parse PD gpio
[ 2.176971] connector-dvi connector0: failed to find video source
[ 2.185485] Error: Driver 'tfp410' is already registered, aborting...
[ 2.367950] ehci-omap 48064800.ehci: Can't get PHY device for port 1: -517
[ 2.460876] dmi-sysfs: dmi entry is absent.
[ 2.484374] omap2_set_init_voltage: unable to find boot up OPP for vdd_core
[ 2.491546] omap2_set_init_voltage: unable to set vdd_core
Loading, please wait...
fsck: error 2 (No such file or directory) while executing fsck.ext4 for
/dev/mmcblk0p2
fsck exited with status code 8
[FAILED] Failed to start Load Kernel Modules.
See 'systemctl status systemd-modules-load.service' for details.
Starting Apply Kernel Variables...
Mounting FUSE Control File System...
Mounting Configuration File System...
[ OK ] Started Create Static Device Nodes in /dev.
[ OK ] Started Apply Kernel Variables.
[ OK ] Mounted FUSE Control File System.
[ OK ] Mounted Configuration File System.
Starting udev Kernel Device Manager...
[ OK ] Started Journal Service.
[ OK ] Started udev Kernel Device Manager.
Starting LSB: Set preliminary keymap...
Starting LSB: Tune IDE hard disks...
[ OK ] Started LSB: Set preliminary keymap.
Starting Remount Root and Kernel File Systems...
[ OK ] Started Remount Root and Kernel File Systems.
Starting udev Coldplug all Devices...
Starting Load/Save Random Seed...
[ OK ] Reached target Local File Systems (Pre).
[ OK ] Reached target Local File Systems.
Starting Raise network interfaces...
Starting Flush Journal to Persistent Storage...
[ OK ] Started LSB: Tune IDE hard disks.
[ OK ] Started Load/Save Random Seed.
[ OK ] Started Flush Journal to Persistent Storage.
Starting Create Volatile Files and Directories...
[ OK ] Started Create Volatile Files and Directories.
Starting Update UTMP about System Boot/Shutdown...
Starting Network Time Synchronization...
[ OK ] Started Update UTMP about System Boot/Shutdown.
[ OK ] Started Network Time Synchronization.
[ OK ] Reached target System Time Synchronized.
[ OK ] Started udev Coldplug all Devices.
[ OK ] Reached target System Initialization.
[ OK ] Listening on node-red.socket.
[ OK ] Listening on cloud9.socket.
[ OK ] Listening on bonescript.socket.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[ OK ] Reached target Sockets.
[ OK ] Reached target Basic System.
Starting System Logging Service...
Starting Generic Board Startup...
Starting LSB: Start busybox udhcpd at boot time...
Starting Restore /etc/resolv.conf i...e the ppp link was shut down....
[ OK ] Started Entropy daemon using the HAVEGE algorithm.
[ OK ] Started D-Bus System Message Bus.
Starting Connection service...
[ OK ] Started Bonescript autorun.
Starting Login Service...
Starting BB WL18xx wlan0 Service...
Starting Cape Manager Service...
Starting Avahi mDNS/DNS-SD Stack...
[ OK ] Started Regular background program processing daemon.
[ OK ] Started Deferred execution scheduler.
[ OK ] Started Daily Cleanup of Temporary Directories.
[ OK ] Reached target Timers.
Starting LSB: Load kernel modules needed to enable cpufreq scaling...
[ OK ] Started System Logging Service.
[ OK ] Started Restore /etc/resolv.conf if...ore the ppp link was shut down..
[ OK ] Started BB WL18xx wlan0 Service.
[ OK ] Started Cape Manager Service.
[ OK ] Started LSB: Start busybox udhcpd at boot time.
[ OK ] Started Avahi mDNS/DNS-SD Stack.
[ OK ] Started Connection service.
[ OK ] Started Login Service.
[ OK ] Started LSB: Load kernel modules needed to enable cpufreq scaling.
Starting WPA supplicant...
Starting LSB: set CPUFreq kernel parameters...
Starting Hostname Service...
[ OK ] Started Raise network interfaces.
[ OK ] Started WPA supplicant.
[ OK ] Started Hostname Service.
[ OK ] Reached target Network.
[ OK ] Reached target Network is Online.
Starting LSB: Apache2 web server...
Starting LSB: Advanced IEEE 802.11 management daemon...
Starting /etc/rc.local Compatibility...
Starting OpenBSD Secure Shell server...
Starting Permit User Sessions...
[ OK ] Started LSB: set CPUFreq kernel parameters.
[ OK ] Started LSB: Advanced IEEE 802.11 management daemon.
[ OK ] Started /etc/rc.local Compatibility.
[ OK ] Started Permit User Sessions.
[ OK ] Started OpenBSD Secure Shell server.
Starting Light Display Manager...
[ OK ] Started Getty on tty1.
[ OK ] Started Light Display Manager.
[ OK ] Started LSB: Apache2 web server.
[ 43.118988] omap_ssi_port 4805a000.ssi-port: couldn't get cawake gpio
(err=-2)!
[ 43.302642] omap_ssi_port 4805b000.ssi-port: couldn't get cawake gpio
(err=-2)!
[ OK ] Stopped Light Display Manager.
Starting Light Display Manager...
[ OK ] Started Light Display Manager.
[ *** ] (2 of 3) A start job is running for dev-ttyS2.device (36s / 1min 30s)[
51.527404] OF: graph: no port node found in /ocp@68000000/isp@480bc000/ports
[ OK ] Found device /dev/ttyS2.
[ OK ] Started Serial Getty on ttyS2.
[ OK ] Stopped Light Display Manager.
Starting Light Display Manager...
[ OK ] Started Light Display Manager.
[ 76.389831] INFO: rcu_sched detected stalls on CPUs/tasks:
[ 76.395355] (detected by 0, t=5252 jiffies, g=13644, c=13643, q=84)
[ 76.401763] All QSes seen, last rcu_sched kthread activity 5252
(-55902--61154), jiffies_till_next_fqs=1, root ->qsmask 0x0
[ 76.413452] rcu_sched kthread starved for 5252 jiffies! g13644 c13643 f0x2
RCU_GP_WAIT_FQS(3) ->state=0x0 ->cpu=0
U-Boot 2018.01-rc2-00001-gd67c2b4dc8 (Dec 19 2017 - 13:29:35 -0600), Build:
jenkins-github_Bootloader-Builder-19
OMAP3630/3730-GP ES1.2, CPU-OPP2, L3-200MHz, Max CPU Clock 1 GHz
OMAP3 Beagle board + LPDDR/NAND
I2C: ready
DRAM: 512 MiB
NAND: 0 MiB
MMC: OMAP SD/MMC: 0
*** Warning - readenv() failed, using default environment
Beagle xM Rev C
No EEPROM on expansion board
No EEPROM on expansion board
OMAP die ID: 12a200029ff80000016842c815012008
Net: usb_ether
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
switch to partitions #0, OK
mmc0 is current device
SD/MMC found on device 0
Checking for: /uEnv.txt ...
reading /uEnv.txt
134 bytes read in 3 ms (43 KiB/s)
Loaded environment from /uEnv.txt
Checking if uenvcmd is set ...
Checking for: /boot/uEnv.txt ...
289 bytes read in 21 ms (12.7 KiB/s)
Loaded environment from /boot/uEnv.txt
Checking if uname_r is set in /boot/uEnv.txt...
Running uname_boot ...
loading /boot/vmlinuz-4.14.8-armv7-x3 ...
6738432 bytes read in 539 ms (11.9 MiB/s)
loading /boot/dtbs/4.14.8-armv7-x3/omap3-beagle-xm.dtb ...
100576 bytes read in 168 ms (584 KiB/s)
loading /boot/initrd.img-4.14.8-armv7-x3 ...
4229963 bytes read in 343 ms (11.8 MiB/s)
root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0
quiet] ...
debug: [bootz 0x82000000 0x88080000:408b4b 0x88000000] ...
## Flattened Device Tree blob at 88000000
Booting using the fdt blob at 0x88000000
Loading Ramdisk to 8fbf7000, end 8ffffb4b ... OK
Loading Device Tree to 8fbdb000, end 8fbf68df ... OK
Starting kernel ...
[ 1.537628] dmi: Firmware registration failed.
[ 2.226806] tfp410 encoder0: failed to parse PD gpio
[ 2.232543] connector-dvi connector0: failed to find video source
[ 2.241027] Error: Driver 'tfp410' is already registered, aborting...
[ 2.426757] ehci-omap 48064800.ehci: Can't get PHY device for port 1: -517
[ 2.516174] dmi-sysfs: dmi entry is absent.
[ 2.539184] omap2_set_init_voltage: unable to find boot up OPP for vdd_core
[ 2.546386] omap2_set_init_voltage: unable to set vdd_core
Welcome to Debian GNU/Linux 9 (stretch)!
[ OK ] Reached target Remote File Systems.
[ OK ] Started Forward Password Requests to Wall Directory Watch.
[ OK ] Reached target Swap.
[ OK ] Listening on udev Control Socket.
[ OK ] Listening on /dev/initctl Compatibility Named Pipe.
[ OK ] Created slice User and Session Slice.
[ OK ] Listening on Journal Audit Socket.
[ OK ] Listening on Journal Socket (/dev/log).
[ OK ] Listening on fsck to fsckd communication Socket.
[ OK ] Started Dispatch Password Requests to Console Directory Watch.
[ OK ] Listening on Syslog Socket.
[ OK ] Reached target Paths.
[ OK ] Listening on udev Kernel Socket.
[ OK ] Reached target Encrypted Volumes.
[ OK ] Set up automount Arbitrary Executab…rmats File System Automount Point.
[ OK ] Created slice System Slice.
[ OK ] Reached target Slices.
[ OK ] Created slice system-getty.slice.
Mounting POSIX Message Queue File System...
[ OK ] Created slice system-serial\x2dgetty.slice.
Mounting /sys/kernel/debug...
[ OK ] Listening on Journal Socket.
Starting Journal Service...
Starting File System Check on Root Device...
Starting Load Kernel Modules...
Starting Create list of required st…ce nodes for the current kernel...
[ OK ] Mounted POSIX Message Queue File System.
[ OK ] Mounted /sys/kernel/debug.
[ OK ] Started Create list of required sta…vice nodes for the current kernel.
[ OK ] Started File System Check Daemon to report status.
Starting Create Static Device Nodes in /dev...
[ OK ] Started File System Check on Root Device.
[FAILED] Failed to start Load Kernel Modules.
See 'systemctl status systemd-modules-load.service' for details.
Mounting Configuration File System...
Mounting FUSE Control File System...
Starting Apply Kernel Variables...
Starting Remount Root and Kernel File Systems...
[ OK ] Mounted Configuration File System.
[ OK ] Mounted FUSE Control File System.
[ OK ] Started Create Static Device Nodes in /dev.
[ OK ] Started Apply Kernel Variables.
Starting udev Kernel Device Manager...
[ OK ] Started Remount Root and Kernel File Systems.
Starting Load/Save Random Seed...
[ OK ] Reached target Local File Systems (Pre).
Starting udev Coldplug all Devices...
[ OK ] Reached target Local File Systems.
Starting Raise network interfaces...
[ OK ] Started Journal Service.
[ OK ] Started Load/Save Random Seed.
Starting Flush Journal to Persistent Storage...
[ OK ] Started Flush Journal to Persistent Storage.
Starting Create Volatile Files and Directories...
[ OK ] Started udev Kernel Device Manager.
[ OK ] Started Create Volatile Files and Directories.
Starting Update UTMP about System Boot/Shutdown...
[ OK ] Started Entropy daemon using the HAVEGE algorithm.
Starting Network Time Synchronization...
[ OK ] Started Update UTMP about System Boot/Shutdown.
[ OK ] Started Network Time Synchronization.
[ OK ] Reached target System Time Synchronized.
[ OK ] Started Raise network interfaces.
[ OK ] Started udev Coldplug all Devices.
[ OK ] Reached target System Initialization.
[ OK ] Started Daily Cleanup of Temporary Directories.
[ OK ] Listening on cloud9.socket.
[ OK ] Listening on node-red.socket.
[ OK ] Listening on bonescript.socket.
[ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[ OK ] Started Daily apt download activities.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Reached target Sockets.
[ OK ] Reached target Basic System.
[ OK ] Started Bonescript autorun.
Starting System Logging Service...
Starting Generic Board Startup...
Starting LSB: Start busybox udhcpd at boot time...
[ OK ] Started Deferred execution scheduler.
Starting BB WL18xx wlan0 Service...
Starting Restore /etc/resolv.conf i…fore the ppp link was shut down...
Starting LSB: Load kernel modules needed to enable cpufreq scaling...
[ OK ] Started Regular background program processing daemon.
Starting Avahi mDNS/DNS-SD Stack...
[ OK ] Started D-Bus System Message Bus.
[ OK ] Started Avahi mDNS/DNS-SD Stack.
Starting Connection service...
[ OK ] Started Daily apt upgrade and clean activities.
[ OK ] Reached target Timers.
Starting Login Service...
[ OK ] Started System Logging Service.
[ OK ] Started BB WL18xx wlan0 Service.
[ OK ] Started Restore /etc/resolv.conf if…before the ppp link was shut down.
[ OK ] Started LSB: Start busybox udhcpd at boot time.
[ OK ] Started Connection service.
[ OK ] Started Login Service.
[ OK ] Reached target Network.
[ OK ] Reached target Network is Online.
Starting LSB: Advanced IEEE 802.11 management daemon...
Starting The Apache HTTP Server...
Starting Permit User Sessions...
[ OK ] Started LSB: Advanced IEEE 802.11 management daemon.
[ OK ] Started Permit User Sessions.
Starting Light Display Manager...
[ OK ] Started Getty on tty1.
[ OK ] Started LSB: Load kernel modules needed to enable cpufreq scaling.
Starting LSB: set CPUFreq kernel parameters...
Starting Hostname Service...
Starting WPA supplicant...
[ OK ] Started WPA supplicant.
[ OK ] Started LSB: set CPUFreq kernel parameters.
[ OK ] Started Hostname Service.
[ OK ] Started Light Display Manager.
[ OK ] Started The Apache HTTP Server.
[ 31.853881] omap_ssi_port 4805a000.ssi-port: couldn't get cawake gpio
(err=-2)!
[ 32.293731] omap_ssi_port 4805b000.ssi-port: couldn't get cawake gpio
(err=-2)!
[ OK ] Stopped Light Display Manager.
Starting Light Display Manager...
[ OK ] Started Light Display Manager.
[ OK ] Stopped Light Display Manager.
Starting Light Display Manager...
[ OK ] Found device /dev/ttyS2.
[ OK ] Started Serial Getty on ttyS2.
[ OK ] Reached target Login Prompts.
[ 48.008605] OF: graph: no port node found in /ocp@68000000/isp@480bc000/ports
[ OK ] Started Light Display Manager.
[ OK ] Stopped Light Display Manager.
Starting Light Display Manager...
[ OK ] Started Light Display Manager.
Debian GNU/Linux 9 beagleboard ttyS2
BeagleBoard.org Debian Image 2017-12-24
Support/FAQ: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian
default username:password is [debian:temppwd]
beagleboard login:
