On Wednesday, 17 January 2018 12:37:03 UTC, Hugh Frater wrote: > > > > On Thursday, 11 May 2017 10:18:08 UTC+1, Hugh Frater wrote: >> >> It looks like we are good-to-go. Thanks for sorting this out guys :) >> >> Hugh >> >> On Wednesday, 10 May 2017 17:16:50 UTC+1, RobertCNelson wrote: >>> >>> On Wed, May 10, 2017 at 10:20 AM, Hugh Frater <hugh....@gmail.com> >>> wrote: >>> > Thanks guys, I'll keep an eye on the repository and grab a copy once >>> things >>> > are finalised. >>> >>> Okay all pushed out.. >>> >>> run: >>> >>> sudo apt update ; sudo apt upgrade >>> >>> and it should show an upgrade for bb-cape-overlays >>> bb-cape-overlays_4.4.20170510.0 >>> >>> reboot and it should work, let us know.. >>> >>> Regards, >>> >>> -- >>> Robert Nelson >>> https://rcn-ee.com/ >>> >> > Just to add to this again - this fix is still required if you use the 8.7 > IoT image but is not required if you use the 9.1 image. Also note that the > pru_ecap mode for P9_42 is now called PWM when you call config-pin >
OK, looks like pru_ecap mode was removed from the .dtbo as an option for this pin - PWM is not what you want if you want to use the pru1 ecap device as a PWM generator - you need mode 3, which is no longer a valid option. Time to downgrade again to 8.6 :( Why can't these options stay when the universal overlays get updated? -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/76dcedb2-8543-4555-8f04-807187200ffa%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
