Hey there, I am new here and completely new to beaglebone. I read the starting guide to board. MI am using Ubuntu 16.04 lts as host machine. My problem is.
When I am connecting BBB to my PC. And opening the start.html file the install driver is not green. I've already run the mkudevrule.sh as root. I can't ssh to 192.168.7.2 says no route to host. I am not able to ping it either. Ping command says destination host unreachable. BBB is shown as enx38d26993f39b in ifconfig and inet addr:10.42.0.1 I manually changed it 192.168.7.1 but no luck with that. I can see dhcpclient running on host as well. Now if I reeboot my PC with BBB attached and then try to connect it works. And it always works that way. I am not sure if this problem is already posted here. Couldn't find anything about it. If I reset my board then it gets disconnected and I need to reeboot my PC in order to connect to board again. Not sure if this is the problem with dhcp. /Etc/network/interfaces reads as below Auto lo Iface lo inet loopback I added below lines to the file Auto eth0 Allow-hotplug eth0 Iface eth0 inet dhcp Please help Prashant -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/97c8044e-1b6f-44a6-9d26-f3829678a087%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
