I just unpacked a Beaglebone Black board and try to get it started as tethered to a PC via USB. I can find and read START.HTM from the BBB. When it comes to Step #2, Install drivers, I start getting problems: 4 of the drivers fail to install on my Windows10 host: Linux Developer Community (usbser) Ports BeagleBone CDM Driver Package - Bus/D2XX Driver BeagleBone CDM Driver Package - VCP Driver Linux Developer Community Net
After that step #3 fails, probably as a consequense of above. My web browser (either Firefox or Chrome) will not find http://192.168.7.2. I've also tried on other computers, running Windows 8 and Windows 7, with no further success. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/f3c83e68-63eb-4529-a84f-27fbc23f3faa%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
