I just tried the IoT image, and Ethernet comes up just fine. I clearly don't understand the differences in the images.
> On Feb 17, 2018, at 01:11 , Rick Mann <[email protected]> wrote: > > I finally got a console image flashed onto my x15, and it seems Ethernet > doesn't work. I get no link lights on either port, and eth0 and eth1 are both > DOWN. If I issue /sbin/ifconfig eth0 up, I don't get any errors, and the > state changes to UP, but I still get no link light nor IP address. > /etc/network/interfaces seems to be set up for DHCP: > > auto eth0 > iface eth0 inet dhcp > > I've tried multiple Ethernet cables and ports on the switch. > > Any suggestions? Am I just missing something obvious, or is my board hosed? > > Thanks, > > -- > Rick Mann > [email protected] > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/625BFC48-1342-445E-93F4-2398E66BB6F1%40latencyzero.com. > For more options, visit https://groups.google.com/d/optout. -- Rick Mann [email protected] -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/8F7D5FBC-4AC6-4E6E-B29C-04EDD2A0F188%40latencyzero.com. For more options, visit https://groups.google.com/d/optout.
