On 21/02/18 04:37, Stuart Longland wrote: > On 21/02/18 01:37, [email protected] wrote: >> I have found hundreds of tutorials over the internet on how to share >> your own computers internet connection over USB with the beaglebone. >> However I want to do the reverse. I want to have the Beaglebone >> connected to the PC with USB and to the router via ethernet. The PC is >> not connected to the router directly. I would then like the Beaglebone >> to share the internet it is getting from the router to the PC over USB. >> >> So far I am doing the following: >> >> |sysctl net.ipv4.ip_forward=1 sudo iptables -t nat -A POSTROUTING -o eth0 >> -j MASQUERADE sudo iptables -A FORWARD -m conntrack --ctstate >> RELATED,ESTABLISHED -j ACCEPT | >> >> sudo iptables -A FORWARD -i usb0 -o eth0 -j ACCEPT >> >> However I am stuck as to what else I am missing for this to be able to >> work. > > Perhaps try this?
Gah, never mind, just saw that was the first thing you ran. Chalk one up for responding to an email whilst half asleep. Try checking with tcpdump that the packets are being properly masqueraded. -- Stuart Longland (aka Redhatter, VK4MSL) I haven't lost my mind... ...it's backed up on a tape somewhere. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/fcd7c688-d1cc-04d6-a97b-5a14cc8130e1%40longlandclan.id.au. For more options, visit https://groups.google.com/d/optout.
