Hello, Just put the capacitor between 5v and ground anywhere.
--Karl www.waltech.com On Wed, Feb 21, 2018 at 9:37 AM, <[email protected]> wrote: > I'm having power issues booting a BBBW, where did you solder in the > capacitor? > > On Monday, March 23, 2015 at 1:46:00 PM UTC-4, Karl Walter wrote: >> >> >> >> On Monday, December 23, 2013 at 12:30:32 PM UTC-8, José Luis Redrejo >> wrote: >>> >>> I've made a power supply to power my BBB, but whenever I connect it >>> (to pins 5 & 1 of P9 connector for VDD & GND), the power led blinks >>> for some seconds and then it is off. >>> >>> The output comes from a 7805CKCT, which can provide up to 1.5A. >>> >>> It's a typical power supply from a rectifier + capacitors + regulator. >>> >>> What does this "blinking" mean? any ideas of what is going wrong? >>> >>> Regards >>> José L. >>> >>> >> This is an old thread, but I thought I'd add a solution. I found that the >> BBB would reset part way through booting when powering the BBB via the >> barrel connector or Vdd_5v pins. I needed to add a large capacitor. 10,000 >> uf did the job. >> > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the > Google Groups "BeagleBoard" group. > To unsubscribe from this topic, visit https://groups.google.com/d/ > topic/beagleboard/Tx9pGjJPZ0A/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > To view this discussion on the web visit https://groups.google.com/d/ > msgid/beagleboard/03a88d07-5604-447f-9631-06f977e81c50%40googlegroups.com > <https://groups.google.com/d/msgid/beagleboard/03a88d07-5604-447f-9631-06f977e81c50%40googlegroups.com?utm_medium=email&utm_source=footer> > . > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAAKJZPHO_BZcoAyEt%3D26-x%3DCRpycvmj8yW7MvN1v4e8xQrnUdQ%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
