Hello all, I've been experimenting with the working PocketBeagle and possibly modified the uEnv.txt file using the Cloud9 IDE terminal. Then I tried to reboot the board with the shutdown –r now command. The board didn't reload successfully, and after rebooting manually only the power LED was on. Thinking that I could have corrupted the image, I then erased the SD-card with the diskpart and flashed the SD-card with Etcher once again. The image used is Debian 9.3 2018-01-28 4GB SD IoT. Again only the power LED is on, no other signs of life. The board is also not present in the Device Manager anymore if the SD-card is on the board. If the board is connected to the PC without the SD-card, it's still recognized in the Device Manager. The SD card is fine, because it's recognized as a Linux filesystem partition, and later I've also flashed the image to a new clean SD-card. If this is of any help, the uEnv.txt after reflashing contains the following lines (apart from the commented ones): uname_r=4.9.78-ti-r94 enable_uboot_overlays=1 enable_uboot_cape_universal=1 cmdline=coherent_pool=1M net.ifnames=0 quiet How can the board be revived? Thanks
-- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/a7f4a2a8-3d3c-4a9e-8db6-178ef695000e%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
