It was really confusing. I put the Jessie lxqt flasher on the SD card, and that’s what I got (the BBB eMMC had something from 2016 on it).
I was able to get the latest-releases stretch from 2018-01-28 (?) to load just fine (never once tried the boot button). -- Rick Mann [email protected] > On Mar 18, 2018, at 10:27, Robert Nelson <[email protected]> wrote: > >> On Sun, Mar 18, 2018 at 4:54 AM, Rick Mann <[email protected]> wrote: >> I just tried booting a brand-new BBB with 4D Systems 7" cap touch LCD cape. >> I get this with the BBB-blank-debian-8.10-lxqt-4gb-armhf-2018-03-06-4gb.img >> image. The checksum and Etcher verification both passed. >> >> U-Boot SPL 2016.01-00001-g4eb802e (Jan 13 2016 - 11:14:31) >> Trying to boot from MMC >> bad magic >> >> >> U-Boot 2016.01-00001-g4eb802e (Jan 13 2016 - 11:14:31 -0600), Build: >> jenkins-github_Bootloader-Builder-313 > > This is ^^ too old, you need to use the U-Boot overlay path for any LCD.. > > Hold the boot select button down, or force a u-boot upgrade via: > > https://elinux.org/Beagleboard:BeagleBoneBlack_Debian#U-Boot_Overlays > >> >> Watchdog enabled >> I2C: ready >> DRAM: 512 MiB >> Reset Source: Global warm SW reset has occurred. >> Reset Source: Power-on reset has occurred. >> MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 >> Using default environment >> >> Net: <ethaddr> not set. Validating first E-fuse MAC >> cpsw, usb_ether >> Press SPACE to abort autoboot in 2 seconds >> gpio: pin 56 (gpio 56) value is 0 >> gpio: pin 55 (gpio 55) value is 0 >> gpio: pin 54 (gpio 54) value is 0 >> gpio: pin 53 (gpio 53) value is 1 >> switch to partitions #0, OK >> mmc1(part 0) is current device >> Scanning mmc 1:1... >> gpio: pin 56 (gpio 56) value is 0 >> gpio: pin 55 (gpio 55) value is 0 >> gpio: pin 54 (gpio 54) value is 0 >> gpio: pin 53 (gpio 53) value is 1 >> switch to partitions #0, OK >> mmc1(part 0) is current device >> gpio: pin 54 (gpio 54) value is 1 >> Checking for: /uEnv.txt ... >> Checking for: /boot.scr ... >> Checking for: /boot/boot.scr ... >> Checking for: /boot/uEnv.txt ... >> gpio: pin 55 (gpio 55) value is 1 >> 1684 bytes read in 14 ms (117.2 KiB/s) >> Loaded environment from /boot/uEnv.txt >> Checking if uname_r is set in /boot/uEnv.txt... >> gpio: pin 56 (gpio 56) value is 1 >> Running uname_boot ... >> loading /boot/vmlinuz-4.1.15-ti-rt-r43 ... >> 7800752 bytes read in 442 ms (16.8 MiB/s) >> loading /boot/dtbs/4.1.15-ti-rt-r43/am335x-boneblack.dtb ... > > Wait a minute:, that's not > BBB-blank-debian-8.10-lxqt-4gb-armhf-2018-03-06-4gb.img > > Whatever you are actually running is really old. > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/9E98519C-4D6E-4C60-9B09-EB8B3420D818%40latencyzero.com. For more options, visit https://groups.google.com/d/optout.
