I'm working on Beagle Bone Black, and I need to change the power button behaivor. Img that I'm using: *bone-debian-8.7-lxqt-4gb-armhf-2017-03-19-4gb.img* As the documentation says, this button can wakeup is the module has in suspend mode. REF: BBONEBLK_SRM BeagleBone Black System Reference Manual Rev C.1 6.1.8.5 WAKEUP The WAKEUP signal from the TPS65217C is connected to the EXT_WAKEUP signal on the processor. This is used to wake up the processor when it is in a sleep mode. When an event is detected by the TPS65217C, such as the power button being pressed, it generates this signal. A note: At this moment, if I press the power button the BBB proceed to shutdown. But, if the BBB is suspended, when I press the power button doesn't wake up. I need to change this behavior to wake up the module. – Anybody knows how can I change it? Thanks a lot! -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/723eb37d-d1bb-4fc9-99fe-7e6c0a796df4%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
