Hi!
See below the serial boot log of a machine I've tried to get off the
ground. It won't boot itself, nor an SD Card. I've tried with a fresh SD
card image with the boot button depressed, and with the internal eMMC
install as well.
Odd thing is, it'd appear to be running 2018-01 uBoot, where I'm fairly
certain that just before this started happening I tried updating it to
2018-03 via Robert's script.
As you'll see from the log, there seems to be a number of causes of the CPU
resetting. I've seen mostly 'data abort' with a few 'prefetch abort' as
well.
Makes me somewhat concerned I've perhaps cooked something along the way
without realising it, either in that uBoot update or by some other means.
Any thoughts, suggestions welcome.
Pete.
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/770360f1-f98f-4ccf-9c46-dd31bf7eae80%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
U-Boot SPL 2018.01-00002-ge9ff418fb8 (Feb 20 2018 - 20:14:57)
Trying to boot from MMC2
U-Boot 2018.01-00002-ge9ff418fb8 (Feb 20 2018 - 20:14:57 -0600), Build:
jenkins-github_Bootloader-Builder-38
CPU : AM335X-GP rev 2.1
I2C: ready
DRAM: 512 MiB
No match for driver 'omap_hsmmc'
No match for driver 'omap_hsmmc'
Some drivers were not found
Reset Source: Power-on reset has occurred.
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
Using default environment
Board: BeagleBone Black
<ethaddr> not set. Validating first E-fuse MAC
BeagleBone Black:
BeagleBone: cape eeprom: i2c_probe: 0x54:
BeagleBone: cape eeprom: i2c_probe: 0x55:
BeagleBone: cape eeprom: i2c_probe: 0x56:
BeagleBone: cape eeprom: i2c_probe: 0x57:
Net: eth0: MII MODE
cpsw, usb_ether
Press SPACE to abort autoboot in 2 seconds
board_name=[A335BNLT] ...
board_rev=[00A5] ...
data abort
pc : [<9ff55404>] lr : [<9ff4f585>]
reloc pc : [<80811404>] lr : [<8080b585>]
sp : 9df23af8 ip : 9ff9dc6c fp : 00000018
r10: 9df34e50 r9 : 9df23ed8 r8 : 00000000
r7 : 9df35000 r6 : 9df34e70 r5 : 00000005 r4 : 9ff9dc4c
r3 : 9df34e48 r2 : 00000000 r1 : 00000028 r0 : 00000000
Flags: nzcv IRQs off FIQs on Mode SVC_32
Resetting CPU ...
resetting ...
U-Boot SPL 2018.01-00002-ge9ff418fb8 (Feb 20 2018 - 20:14:57)
Trying to boot from MMC2
U-Boot 2018.01-00002-ge9ff418fb8 (Feb 20 2018 - 20:14:57 -0600), Build:
jenkins-github_Bootloader-Builder-38
CPU : AM335X-GP rev 2.1
I2C: ready
DRAM: 512 MiB
No match for driver 'omap_hsmmc'
No match for driver 'omap_hsmmc'
Some drivers were not found
Reset Source: Global warm SW reset has occurred.
Reset Source: Power-on reset has occurred.
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
Using default environment
Board: BeagleBone Black
<ethaddr> not set. Validating first E-fuse MAC
BeagleBone Black:
BeagleBone: cape eeprom: i2c_probe: 0x54:
BeagleBone: cape eeprom: i2c_probe: 0x55:
BeagleBone: cape eeprom: i2c_probe: 0x56:
BeagleBone: cape eeprom: i2c_probe: 0x57:
Net: eth0: MII MODE
cpsw, usb_ether
Press SPACE to abort autoboot in 2 seconds
board_name=[A335BNLT] ...
board_rev=[00A5] ...
switch to partitions #0, OK
mmc0 is current device
SD/MMC found on device 0
** Bad device 0:2 0x82000000 **
** Bad device 0:2 0x82000000 **
prefetch abort
pc : [<fffffffc>] lr : [<9ff4f5a3>]
reloc pc : [<e08bbffc>] lr : [<8080b5a3>]
sp : 9df23a48 ip : 9df238d8 fp : 9df23ac4
r10: 00000002 r9 : 9df23ed8 r8 : 00000003
r7 : 00000000 r6 : 9df28508 r5 : 00000000 r4 : 00000000
r3 : 9df285d8 r2 : 00000000 r1 : f285a800 r0 : 9df285b0
Flags: Nzcv IRQs off FIQs on Mode SVC_32
Resetting CPU ...
resetting ...
U-Boot SPL 2018.01-00002-ge9ff418fb8 (Feb 20 2018 - 20:14:57)
Trying to boot from MMC2
U-Boot 2018.01-00002-ge9ff418fb8 (Feb 20 2018 - 20:14:57 -0600), Build:
jenkins-github_Bootloader-Builder-38
CPU : AM335X-GP rev 2.1
I2C: ready
DRAM: 512 MiB
No match for driver 'omap_hsmmc'
No match for driver 'omap_hsmmc'
Some drivers were not found
Reset Source: Global warm SW reset has occurred.
Reset Source: Power-on reset has occurred.
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
Using default environment
Board: BeagleBone Black
<ethaddr> not set. Validating first E-fuse MAC
BeagleBone Black:
BeagleBone: cape eeprom: i2c_probe: 0x54:
BeagleBone: cape eeprom: i2c_probe: 0x55:
BeagleBone: cape eeprom: i2c_probe: 0x56:
BeagleBone: cape eeprom: i2c_probe: 0x57:
Net: eth0: MII MODE
cpsw, usb_ether
Press SPACE to abort autoboot in 2 seconds
board_name=[A335BNLT] ...
board_rev=[00A5] ...
switch to partitions #0, OK
mmc0 is current device
SD/MMC found on device 0
** Bad device 0:2 0x82000000 **
** Bad device 0:2 0x82000000 **
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
gpio: pin 56 (gpio 56) value is 0
gpio: pin 55 (gpio 55) value is 0
gpio: pin 54 (gpio 54) value is 0
gpio: pin 53 (gpio 53) value is 1
switch to partitions #0, OK
mmc0 is current device
gpio: pin 54 (gpio 54) value is 1
Checking for: /uEnv.txt ...
Checking for: /boot.scr ...
Checking for: /boot/boot.scr ...
Checking for: /boot/uEnv.txt ...
gpio: pin 55 (gpio 55) value is 1
1878 bytes read in 38 ms (47.9 KiB/s)
Loaded environment from /boot/uEnv.txt
Checking if uname_r is set in /boot/uEnv.txt...
gpio: pin 56 (gpio 56) value is 1
Running uname_boot ...
loading /boot/vmlinuz-4.9.82-ti-r102 ...
9970640 bytes read in 714 ms (13.3 MiB/s)
uboot_overlays: [uboot_base_dtb=am335x-boneblack-uboot.dtb] ...
uboot_overlays: Switching too: dtb=am335x-boneblack-uboot.dtb ...
loading /boot/dtbs/4.9.82-ti-r102/am335x-boneblack-uboot.dtb ...
61622 bytes read in 58 ms (1 MiB/s)
uboot_overlays: [fdt_buffer=0x60000] ...
uboot_overlays: loading /lib/firmware/BB-BONE-eMMC1-01-00A0.dtbo ...
1440 bytes read in 214 ms (5.9 KiB/s)
uboot_overlays: loading /lib/firmware/BB-HDMI-TDA998x-00A0.dtbo ...
5127 bytes read in 404 ms (11.7 KiB/s)
uboot_overlays: loading /lib/firmware/BB-ADC-00A0.dtbo ...
711 bytes read in 390 ms (1000 Bytes/s)
data abort
pc : [<9ff55404>] lr : [<9ff6de8d>]
reloc pc : [<80811404>] lr : [<80829e8d>]
sp : 9df230c0 ip : 9df4728c fp : 9df230e0
r10: 000020e0 r9 : 9df23ed8 r8 : 9df2314e
r7 : 9ff9dc7c r6 : 9df47288 r5 : 00000000 r4 : 9ff9dc4c
r3 : 9df471c8 r2 : 00000000 r1 : 00001e38 r0 : 00000000
Flags: nzcv IRQs off FIQs on Mode SVC_32
Resetting CPU ...
resetting ...
U-Boot SPL 2018.01-00002-ge9ff418fb8 (Feb 20 2018 - 20:14:57)
Trying to boot from MMC2
U-Boot 2018.01-00002-ge9ff418fb8 (Feb 20 2018 - 20:14:57 -0600), Build:
jenkins-github_Bootloader-Builder-38
CPU : AM335X-GP rev 2.1
I2C: ready
DRAM: 512 MiB
No match for driver 'omap_hsmmc'
No match for driver 'omap_hsmmc'
Some drivers were not found
Reset Source: Global warm SW reset has occurred.
Reset Source: Power-on reset has occurred.
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
Using default environment
Board: BeagleBone Black
<ethaddr> not set. Validating first E-fuse MAC
BeagleBone Black:
BeagleBone: cape eeprom: i2c_probe: 0x54:
BeagleBone: cape eeprom: i2c_probe: 0x55:
BeagleBone: cape eeprom: i2c_probe: 0x56:
BeagleBone: cape eeprom: i2c_probe: 0x57:
Net: eth0: MII MODE
cpsw, usb_ether
Press SPACE to abort autoboot in 2 seconds
board_name=[A335BNLT] ...
board_rev=[00A5] ...
switch to partitions #0, OK
mmc0 is current device
SD/MMC found on device 0
data abort
pc : [<9ff554f2>] lr : [<9ff4f5f7>]
reloc pc : [<808114f2>] lr : [<8080b5f7>]
sp : 9df23a00 ip : 9ff9dc7c fp : 9df2e340
r10: 00000000 r9 : 9df23ed8 r8 : 00000000
r7 : 00000009 r6 : 9ff9dc4c r5 : 9df2e340 r4 : 00000010
r3 : 9df34ce8 r2 : 30303030 r1 : 32387830 r0 : 9df34cd8
Flags: nzCv IRQs off FIQs on Mode SVC_32
Resetting CPU ...
resetting ...
U-Boot SPL 2018.01-00002-ge9ff418fb8 (Feb 20 2018 - 20:14:57)
Trying to boot from MMC2
U-Boot 2018.01-00002-ge9ff418fb8 (Feb 20 2018 - 20:14:57 -0600), Build:
jenkins-github_Bootloader-Builder-38
CPU : AM335X-GP rev 2.1
I2C: ready
DRAM: 512 MiB
No match for driver 'omap_hsmmc'
No match for driver 'omap_hsmmc'
Some drivers were not found
Reset Source: Global warm SW reset has occurred.
Reset Source: Power-on reset has occurred.
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
Using default environment
Board: BeagleBone Black
<ethaddr> not set. Validating first E-fuse MAC
BeagleBone Black:
BeagleBone: cape eeprom: i2c_probe: 0x54:
BeagleBone: cape eeprom: i2c_probe: 0x55:
BeagleBone: cape eeprom: i2c_probe: 0x56:
BeagleBone: cape eeprom: i2c_probe: 0x57:
Net: eth0: MII MODE
cpsw, usb_ether
Press SPACE to abort autoboot in 2 seconds
board_name=[A335BNLT] ...
board_rev=[00A5] ...
switch to partitions #0, OK
mmc0 is current device
SD/MMC found on device 0
** Bad device 0:2 0x82000000 **
** Bad device 0:2 0x82000000 **
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
gpio: pin 56 (gpio 56) value is 0
gpio: pin 55 (gpio 55) value is 0
gpio: pin 54 (gpio 54) value is 0
gpio: pin 53 (gpio 53) value is 1
switch to partitions #0, OK
mmc0 is current device
gpio: pin 54 (gpio 54) value is 1
Checking for: /uEnv.txt ...
Checking for: /boot.scr ...
Checking for: /boot/boot.scr ...
Checking for: /boot/uEnv.txt ...
gpio: pin 55 (gpio 55) value is 1
1878 bytes read in 38 ms (47.9 KiB/s)
Loaded environment from /boot/uEnv.txt
Checking if uname_r is set in /boot/uEnv.txt...
gpio: pin 56 (gpio 56) value is 1
Running uname_boot ...
loading /boot/vmlinuz-4.9.82-ti-r102 ...
9970640 bytes read in 713 ms (13.3 MiB/s)
uboot_overlays: [uboot_base_dtb=am335x-boneblack-uboot.dtb] ...
uboot_overlays: Switching too: dtb=am335x-boneblack-uboot.dtb ...
loading /boot/dtbs/4.9.82-ti-r102/am335x-boneblack-uboot.dtb ...
61622 bytes read in 57 ms (1 MiB/s)
uboot_overlays: [fdt_buffer=0x60000] ...
data abort
pc : [<9ff4f85e>] lr : [<9ff9dcac>]
reloc pc : [<8080b85e>] lr : [<80859cac>]
sp : 9df231f0 ip : 9ff9dc8c fp : 00000002
r10: ffffffff r9 : 9df23ed8 r8 : 9df46dd9
r7 : 9df46db8 r6 : 9df23221 r5 : 00000004 r4 : 9df23234
r3 : 9ffa03dc r2 : 00000063 r1 : 00000000 r0 : 9df46eb8
Flags: Nzcv IRQs off FIQs on Mode SVC_32
Resetting CPU ...
resetting ...
U-Boot SPL 2018.01-00002-ge9ff418fb8 (Feb 20 2018 - 20:14:57)
Trying to boot from MMC2
U-Boot 2018.01-00002-ge9ff418fb8 (Feb 20 2018 - 20:14:57 -0600), Build:
jenkins-github_Bootloader-Builder-38
CPU : AM335X-GP rev 2.1
I2C: ready
DRAM: 512 MiB
No match for driver 'omap_hsmmc'
No match for driver 'omap_hsmmc'
Some drivers were not found
Reset Source: Global warm SW reset has occurred.
Reset Source: Power-on reset has occurred.
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
Using default environment
Board: BeagleBone Black
<ethaddr> not set. Validating first E-fuse MAC
BeagleBone Black:
BeagleBone: cape eeprom: i2c_probe: 0x54:
BeagleBone: cape eeprom: i2c_probe: 0x55:
BeagleBone: cape eeprom: i2c_probe: 0x56:
BeagleBone: cape eeprom: i2c_probe: 0x57:
Net: eth0: MII MODE
cpsw, usb_ether
Press SPACE to abort autoboot in 2 seconds
board_name=[A335BNLT] ...
board_rev=[00A5] ...
switch to partitions #0, OK
mmc0 is current device
SD/MMC found on device 0
** Bad device 0:2 0x82000000 **
** Bad device 0:2 0x82000000 **
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
gpio: pin 56 (gpio 56) value is 0
gpio: pin 55 (gpio 55) value is 0
gpio: pin 54 (gpio 54) value is 0
gpio: pin 53 (gpio 53) value is 1
switch to partitions #0, OK
mmc0 is current device
gpio: pin 54 (gpio 54) value is 1
Checking for: /uEnv.txt ...
Checking for: /boot.scr ...
Checking for: /boot/boot.scr ...
Checking for: /boot/uEnv.txt ...
gpio: pin 55 (gpio 55) value is 1
1878 bytes read in 38 ms (47.9 KiB/s)
Loaded environment from /boot/uEnv.txt
Checking if uname_r is set in /boot/uEnv.txt...
gpio: pin 56 (gpio 56) value is 1
Running uname_boot ...
loading /boot/vmlinuz-4.9.82-ti-r102 ...
9970640 bytes read in 713 ms (13.3 MiB/s)
uboot_overlays: [uboot_base_dtb=am335x-boneblack-uboot.dtb] ...
uboot_overlays: Switching too: dtb=am335x-boneblack-uboot.dtb ...
loading /boot/dtbs/4.9.82-ti-r102/am335x-boneblack-uboot.dtb ...
61622 bytes read in 57 ms (1 MiB/s)
uboot_overlays: [fdt_buffer=0x60000] ...
uboot_overlays: loading /lib/firmware/BB-BONE-eMMC1-01-00A0.dtbo ...
1440 bytes read in 213 ms (5.9 KiB/s)
uboot_overlays: loading /lib/firmware/BB-HDMI-TDA998x-00A0.dtbo ...
prefetch abort
pc : [<9ff68fcc>] lr : [<9ff69175>]
reloc pc : [<80824fcc>] lr : [<80825175>]
sp : 9df230b8 ip : 00000020 fp : 00000000
r10: 00000000 r9 : 9df23ed8 r8 : 88080000
r7 : 9df46f68 r6 : 000016d5 r5 : 00000000 r4 : 00000000
r3 : 9ffbaf04 r2 : 00000000 r1 : 88080000 r0 : 00000002
Flags: nZCv IRQs off FIQs on Mode SVC_32
Resetting CPU ...
resetting ...
U-Boot SPL 2018.01-00002-ge9ff418fb8 (Feb 20 2018 - 20:14:57)
Trying to boot from MMC2
U-Boot 2018.01-00002-ge9ff418fb8 (Feb 20 2018 - 20:14:57 -0600), Build:
jenkins-github_Bootloader-Builder-38
CPU : AM335X-GP rev 2.1
I2C: ready
DRAM: 512 MiB
No match for driver 'omap_hsmmc'
No match for driver 'omap_hsmmc'
Some drivers were not found
Reset Source: Global warm SW reset has occurred.
Reset Source: Power-on reset has occurred.
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
Using default environment
Board: BeagleBone Black
<ethaddr> not set. Validating first E-fuse MAC
BeagleBone Black:
BeagleBone: cape eeprom: i2c_probe: 0x54:
BeagleBone: cape eeprom: i2c_probe: 0x55:
BeagleBone: cape eeprom: i2c_probe: 0x56:
BeagleBone: cape eeprom: i2c_probe: 0x57:
Net: eth0: MII MODE
cpsw, usb_ether
Press SPACE to abort autoboot in 2 seconds
board_name=[A335BNLT] ...
board_rev=[00A5] ...
switch to partitions #0, OK
mmc0 is current device
SD/MMC found on device 0
** Bad device 0:2 0x82000000 **
prefetch abort
pc : [<fffffffc>] lr : [<9ff4f5a3>]
reloc pc : [<e08bbffc>] lr : [<8080b5a3>]
sp : 9df23a98 ip : 9df23928 fp : 9df23b14
r10: 00000002 r9 : 9df23ed8 r8 : 00000003
r7 : 00000000 r6 : 9df34ad0 r5 : 00000000 r4 : 00000000
r3 : 9df34ba0 r2 : 00000000 r1 : f34b7000 r0 : 9df34b78
Flags: Nzcv IRQs off FIQs on Mode SVC_32
Resetting CPU ...
resetting ...
U-Boot SPL 2018.01-00002-ge9ff418fb8 (Feb 20 2018 - 20:14:57)
Trying to boot from MMC2
U-Boot 2018.01-00002-ge9ff418fb8 (Feb 20 2018 - 20:14:57 -0600), Build:
jenkins-github_Bootloader-Builder-38
CPU : AM335X-GP rev 2.1
I2C: ready
DRAM: 512 MiB
No match for driver 'omap_hsmmc'
No match for driver 'omap_hsmmc'
Some drivers were not found
Reset Source: Global warm SW reset has occurred.
Reset Source: Power-on reset has occurred.
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
Using default environment
Board: BeagleBone Black
<ethaddr> not set. Validating first E-fuse MAC
BeagleBone Black:
BeagleBone: cape eeprom: i2c_probe: 0x54:
BeagleBone: cape eeprom: i2c_probe: 0x55:
BeagleBone: cape eeprom: i2c_probe: 0x56:
BeagleBone: cape eeprom: i2c_probe: 0x57:
Net: eth0: MII MODE
cpsw, usb_ether
Press SPACE to abort autoboot in 2 seconds
board_name=[A335BNLT] ...
board_rev=[00A5] ...
data abort
pc : [<9ff55404>] lr : [<9ff4f593>]
reloc pc : [<80811404>] lr : [<8080b593>]
sp : 9df23af8 ip : 9ff9dc6c fp : 00000018
r10: 9df34fa8 r9 : 9df23ed8 r8 : 00000000
r7 : 9df35030 r6 : 9df2ee98 r5 : 00656c6f r4 : 9ff9dc4c
r3 : 9df2ee88 r2 : 00000000 r1 : 00000010 r0 : 00000000
Flags: nzcv IRQs off FIQs on Mode SVC_32
Resetting CPU ...
resetting ...
U-Boot SPL 2018.01-00002-ge9ff418fb8 (Feb 20 2018 - 20:14:57)
Trying to boot from MMC2
U-Boot 2018.01-00002-ge9ff418fb8 (Feb 20 2018 - 20:14:57 -0600), Build:
jenkins-github_Bootloader-Builder-38
CPU : AM335X-GP rev 2.1
I2C: ready
DRAM: 512 MiB
No match for driver 'omap_hsmmc'
No match for driver 'omap_hsmmc'
Some drivers were not found
Reset Source: Global warm SW reset has occurred.
Reset Source: Power-on reset has occurred.
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
Using default environment
Board: BeagleBone Black
<ethaddr> not set. Validating first E-fuse MAC
BeagleBone Black:
BeagleBone: cape eeprom: i2c_probe: 0x54:
BeagleBone: cape eeprom: i2c_probe: 0x55:
BeagleBone: cape eeprom: i2c_probe: 0x56:
BeagleBone: cape eeprom: i2c_probe: 0x57:
Net: eth0: MII MODE
cpsw, usb_ether
Press SPACE to abort autoboot in 2 seconds
board_name=[A335BNLT] ...
board_rev=[00A5] ...
data abort
data abort
pc : [<9b308288>] lr : [<9ff962d0>]
reloc pc : [<7bbc4288>] lr : [<808522d0>]
sp : 9df23a10 ip : 00000020 fp : 00000018
r10: 9df34e50 r9 : 9df23ed8 r8 : 270e7de3
r7 : 9df35000 r6 : 9df34e70 r5 : 9df23ae4 r4 : 25068021
r3 : 9ff9629c r2 : 00000000 r1 : 9ff82c70 r0 : 2782d691
Flags: nZcv IRQs on FIQs on Mode SVC_32
Resetting CPU ...
resetting ...
U-Boot SPL 2018.01-00002-ge9ff418fb8 (Feb 20 2018 - 20:14:57)
Trying to boot from MMC2
U-Boot 2018.01-00002-ge9ff418fb8 (Feb 20 2018 - 20:14:57 -0600), Build:
jenkins-github_Bootloader-Builder-38
CPU : AM335X-GP rev 2.1
I2C: ready
DRAM: 512 MiB
No match for driver 'omap_hsmmc'
No match for driver 'omap_hsmmc'
Some drivers were not found
Reset Source: Global warm SW reset has occurred.
Reset Source: Power-on reset has occurred.
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
Using default environment
Board: BeagleBone Black
<ethaddr> not set. Validating first E-fuse MAC
BeagleBone Black:
BeagleBone: cape eeprom: i2c_probe: 0x54:
BeagleBone: cape eeprom: i2c_probe: 0x55:
BeagleBone: cape eeprom: i2c_probe: 0x56:
BeagleBone: cape eeprom: i2c_probe: 0x57:
Net: eth0: MII MODE
cpsw, usb_ether
Press SPACE to abort autoboot in 2 seconds
board_name=[A335BNLT] ...
board_rev=[00A5] ...
switch to partitions #0, OK
mmc0 is current device
SD/MMC found on device 0
** Bad device specification 0:2 ${script} **
** Bad device specification 0:2 uEnv **
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
data abort
pc : [<9ff554f2>] lr : [<9ff4f6ad>]
reloc pc : [<808114f2>] lr : [<8080b6ad>]
sp : 9df232b8 ip : 9ff9ffd8 fp : 00000002
r10: 0000002d r9 : 9df23ed8 r8 : 00000020
r7 : 9df28c58 r6 : 9ff9dc4c r5 : 00000000 r4 : 00000010
r3 : 9df2b2d0 r2 : 9df28c58 r1 : 00000000 r0 : 9df2a0a8
Flags: nzCv IRQs off FIQs on Mode SVC_32
Resetting CPU ...
resetting ...
U-Boot SPL 2018.01-00002-ge9ff418fb8 (Feb 20 2018 - 20:14:57)
Trying to boot from MMC2
U-Boot 2018.01-00002-ge9ff418fb8 (Feb 20 2018 - 20:14:57 -0600), Build:
jenkins-github_Bootloader-Builder-38
CPU : AM335X-GP rev 2.1
I2C: ready
DRAM: 512 MiB
No match for driver 'omap_hsmmc'
No match for driver 'omap_hsmmc'
Some drivers were not found
Reset Source: Global warm SW reset has occurred.
Reset Source: Power-on reset has occurred.
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
Using default environment
Board: BeagleBone Black
<ethaddr> not set. Validating first E-fuse MAC
BeagleBone Black:
BeagleBone: cape eeprom: i2c_probe: 0x54:
BeagleBone: cape eeprom: i2c_probe: 0x55:
BeagleBone: cape eeprom: i2c_probe: 0x56:
BeagleBone: cape eeprom: i2c_probe: 0x57:
Net: eth0: MII MODE
cpsw, usb_ether
Press SPACE to abort autoboot in 2 seconds
board_name=[A335BNLT] ...
board_rev=[00A5] ...
switch to partitions #0, OK
mmc0 is current device
SD/MMC found on device 0
** Bad device 0:2 0x82000000 **
prefetch abort
pc : [<fffffffc>] lr : [<9ff4f5a3>]
reloc pc : [<e08bbffc>] lr : [<8080b5a3>]
sp : 9df23a98 ip : 9df23928 fp : 9df23b14
r10: 00000002 r9 : 9df23ed8 r8 : 00000003
r7 : 00000000 r6 : 9df34ad0 r5 : 00000000 r4 : 00000000
r3 : 9df34ba0 r2 : 00000000 r1 : f34b7000 r0 : 9df34b78
Flags: Nzcv IRQs off FIQs on Mode SVC_32
Resetting CPU ...
resetting ...
U-Boot SPL 2018.01-00002-ge9ff418fb8 (Feb 20 2018 - 20:14:57)
Trying to boot from MMC2
U-Boot 2018.01-00002-ge9ff418fb8 (Feb 20 2018 - 20:14:57 -0600), Build:
jenkins-github_Bootloader-Builder-38
CPU : AM335X-GP rev 2.1
I2C: ready
DRAM: 512 MiB
No match for driver 'omap_hsmmc'
No match for driver 'omap_hsmmc'
Some drivers were not found
Reset Source: Global warm SW reset has occurred.
Reset Source: Power-on reset has occurred.
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
Using default environment
Board: BeagleBone Black
<ethaddr> not set. Validating first E-fuse MAC
BeagleBone Black:
BeagleBone: cape eeprom: i2c_probe: 0x54:
BeagleBone: cape eeprom: i2c_probe: 0x55:
BeagleBone: cape eeprom: i2c_probe: 0x56:
BeagleBone: cape eeprom: i2c_probe: 0x57:
Net: eth0: MII MODE
cpsw, usb_ether
Press SPACE to abort autoboot in 2 seconds
board_name=[A335BNLT] ...
data abort
pc : [<9ff4f50c>] lr : [<9ff503d9>]
reloc pc : [<8080b50c>] lr : [<8080c3d9>]
sp : 9df23b38 ip : 9ff9ffd8 fp : 00000000
r10: 00000000 r9 : 9df23ed8 r8 : 9ff4fabd
r7 : 9ff9fed0 r6 : 00000001 r5 : 00000000 r4 : 9df23b9c
r3 : 00000000 r2 : 9ff9fed8 r1 : 00000002 r0 : ffffffff
Flags: Nzcv IRQs off FIQs on Mode SVC_32
Resetting CPU ...
resetting ...
U-Boot SPL 2018.01-00002-ge9ff418fb8 (Feb 20 2018 - 20:14:57)
Trying to boot from MMC2
U-Boot 2018.01-00002-ge9ff418fb8 (Feb 20 2018 - 20:14:57 -0600), Build:
jenkins-github_Bootloader-Builder-38
CPU : AM335X-GP rev 2.1
I2C: ready
DRAM: 512 MiB
No match for driver 'omap_hsmmc'
No match for driver 'omap_hsmmc'
Some drivers were not found
Reset Source: Global warm SW reset has occurred.
Reset Source: Power-on reset has occurred.
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
Using default environment
Board: BeagleBone Black
<ethaddr> not set. Validating first E-fuse MAC
BeagleBone Black:
BeagleBone: cape eeprom: i2c_probe: 0x54:
BeagleBone: cape eeprom: i2c_probe: 0x55:
BeagleBone: cape eeprom: i2c_probe: 0x56:
BeagleBone: cape eeprom: i2c_probe: 0x57:
Net: eth0: MII MODE
cpsw, usb_ether
Press SPACE to abort autoboot in 2 seconds
board_name=[A335BNLT] ...
board_rev=[00A5] ...
switch to partitions #0, OK
mmc0 is current device
SD/MMC found on device 0
** Bad device 0:2 0x82000000 **
** Bad device 0:2 0x82000000 **
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
gpio: pin 56 (gpio 56) value is 0
gpio: pin 55 (gpio 55) value is 0
gpio: pin 54 (gpio 54) value is 0
gpio: pin 53 (gpio 53) value is 1
switch to partitions #0, OK
mmc0 is current device
gpio: pin 54 (gpio 54) value is 1
Checking for: /uEnv.txt ...
Checking for: /boot.scr ...
Checking for: /boot/boot.scr ...
Checking for: /boot/uEnv.txt ...
data abort
pc : [<9ff55404>] lr : [<9ff4f593>]
reloc pc : [<80811404>] lr : [<8080b593>]
sp : 9df23748 ip : 00000000 fp : 00000018
r10: 9df36ba8 r9 : 9df23ed8 r8 : 00000000
r7 : 9df37088 r6 : 9df36a68 r5 : 9ff9dc54 r4 : 9ff9dc4c
r3 : 9df36a58 r2 : 00000000 r1 : 00000010 r0 : 00000000
Flags: nzcv IRQs off FIQs on Mode SVC_32
Resetting CPU ...
resetting ...
U-Boot SPL 2018.01-00002-ge9ff418fb8 (Feb 20 2018 - 20:14:57)
Trying to boot from MMC2
U-Boot 2018.01-00002-ge9ff418fb8 (Feb 20 2018 - 20:14:57 -0600), Build:
jenkins-github_Bootloader-Builder-38
CPU : AM335X-GP rev 2.1
I2C: ready
DRAM: 512 MiB
No match for driver 'omap_hsmmc'
No match for driver 'omap_hsmmc'
Some drivers were not found
Reset Source: Global warm SW reset has occurred.
Reset Source: Power-on reset has occurred.
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
Using default environment
Board: BeagleBone Black
<ethaddr> not set. Validating first E-fuse MAC
BeagleBone Black:
BeagleBone: cape eeprom: i2c_probe: 0x54:
BeagleBone: cape eeprom: i2c_probe: 0x55:
BeagleBone: cape eeprom: i2c_probe: 0x56:
BeagleBone: cape eeprom: i2c_probe: 0x57:
Net: eth0: MII MODE
cpsw, usb_ether
Press SPACE to abort autoboot in 2 seconds
board_name=[A335BNLT] ...
board_rev=[00A5] ...
data abort
pc : [<9ff55404>] lr : [<9ff4f593>]
reloc pc : [<80811404>] lr : [<8080b593>]
sp : 9df23af8 ip : 9ff9dc6c fp : 00000018
r10: 9df34f98 r9 : 9df23ed8 r8 : 00000000
r7 : 9df35020 r6 : 9df2ee98 r5 : 00656c6f r4 : 9ff9dc4c
r3 : 9df2ee88 r2 : 00000000 r1 : 00000010 r0 : 00000000
Flags: nzcv IRQs off FIQs on Mode SVC_32
Resetting CPU ...
resetting ...
U-Boot SPL 2018.01-00002-ge9ff418fb8 (Feb 20 2018 - 20:14:57)
Trying to boot from MMC2
U-Boot 2018.01-00002-ge9ff418fb8 (Feb 20 2018 - 20:14:57 -0600), Build:
jenkins-github_Bootloader-Builder-38
CPU : AM335X-GP rev 2.1
I2C: ready
DRAM: 512 MiB
No match for driver 'omap_hsmmc'
No match for driver 'omap_hsmmc'
Some drivers were not found
Reset Source: Global warm SW reset has occurred.
Reset Source: Power-on reset has occurred.
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
Using default environment
Board: BeagleBone Black
<ethaddr> not set. Validating first E-fuse MAC
BeagleBone Black:
BeagleBone: cape eeprom: i2c_probe: 0x54:
BeagleBone: cape eeprom: i2c_probe: 0x55:
BeagleBone: cape eeprom: i2c_probe: 0x56:
BeagleBone: cape eeprom: i2c_probe: 0x57:
Net: eth0: MII MODE
cpsw, usb_ether
Press SPACE to abort autoboot in 2 seconds
board_name=[A335BNLT] ...
board_rev=[00A5] ...
switch to partitions #0, OK
mmc0 is current device
SD/MMC found on device 0
** Bad device 0:2 0x82000000 **
** Bad device 0:2 0x82000000 **
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
gpio: pin 56 (gpio 56) value is 0
gpio: pin 55 (gpio 55) value is 0
gpio: pin 54 (gpio 54) value is 0
gpio: pin 53 (gpio 53) value is 1
switch to partitions #0, OK
mmc0 is current device
gpio: pin 54 (gpio 54) value is 1
Checking for: /uEnv.txt ...
Checking for: /boot.scr ...
Checking for: /boot/boot.scr ...
Checking for: /boot/uEnv.txt ...
gpio: pin 55 (gpio 55) value is 1
1878 bytes read in 38 ms (47.9 KiB/s)
Loaded environment from /boot/uEnv.txt
Checking if uname_r is set in /boot/uEnv.txt...
gpio: pin 56 (gpio 56) value is 1
Running uname_boot ...
loading /boot/vmlinuz-4.9.82-ti-r102 ...
9970640 bytes read in 713 ms (13.3 MiB/s)
uboot_overlays: [uboot_base_dtb=am335x-boneblack-uboot.dtb] ...
uboot_overlays: Switching too: dtb=am335x-boneblack-uboot.dtb ...
loading /boot/dtbs/4.9.82-ti-r102/am335x-boneblack-uboot.dtb ...
61622 bytes read in 58 ms (1 MiB/s)
uboot_overlays: [fdt_buffer=0x60000] ...
data abort
pc : [<9ff4f85e>] lr : [<9ff9dcac>]
reloc pc : [<8080b85e>] lr : [<80859cac>]
sp : 9df231f0 ip : 9ff9dc8c fp : 00000002
r10: ffffffff r9 : 9df23ed8 r8 : 9df46dd9
r7 : 9df46db8 r6 : 9df23221 r5 : 00000004 r4 : 9df23234
r3 : 9ffa03dc r2 : 00000063 r1 : 00000000 r0 : 9df46eb8
Flags: Nzcv IRQs off FIQs on Mode SVC_32
Resetting CPU ...
resetting ...
U-Boot SPL 2018.01-00002-ge9ff418fb8 (Feb 20 2018 - 20:14:57)
Trying to boot from MMC2
U-Boot 2018.01-00002-ge9ff418fb8 (Feb 20 2018 - 20:14:57 -0600), Build:
jenkins-github_Bootloader-Builder-38
CPU : AM335X-GP rev 2.1
I2C: ready
DRAM: 512 MiB
No match for driver 'omap_hsmmc'
No match for driver 'omap_hsmmc'
Some drivers were not found
Reset Source: Global warm SW reset has occurred.
Reset Source: Power-on reset has occurred.
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
Using default environment
Board: BeagleBone Black
<ethaddr> not set. Validating first E-fuse MAC
BeagleBone Black:
BeagleBone: cape eeprom: i2c_probe: 0x54:
BeagleBone: cape eeprom: i2c_probe: 0x55:
BeagleBone: cape eeprom: i2c_probe: 0x56:
BeagleBone: cape eeprom: i2c_probe: 0x57:
Net: eth0: MII MODE
cpsw, usb_ether
Press SPACE to abort autoboot in 2 seconds
board_name=[A335BNLT] ...
board_rev=[00A5] ...
data abort
pc : [<9ff55404>] lr : [<9ff4f585>]
reloc pc : [<80811404>] lr : [<8080b585>]
sp : 9df23af8 ip : 9ff9dc6c fp : 00000018
r10: 9df34e50 r9 : 9df23ed8 r8 : 00000000
r7 : 9df35000 r6 : 9df34e70 r5 : 00000005 r4 : 9ff9dc4c
r3 : 9df34e48 r2 : 00000000 r1 : 00000028 r0 : 00000000
Flags: nzcv IRQs off FIQs on Mode SVC_32
Resetting CPU ...
resetting ...
U-Boot SPL 2018.01-00002-ge9ff418fb8 (Feb 20 2018 - 20:14:57)
Trying to boot from MMC2
U-Boot 2018.01-00002-ge9ff418fb8 (Feb 20 2018 - 20:14:57 -0600), Build:
jenkins-github_Bootloader-Builder-38
CPU : AM335X-GP rev 2.1
I2C: ready
DRAM: 512 MiB
No match for driver 'omap_hsmmc'
No match for driver 'omap_hsmmc'
Some drivers were not found
Reset Source: Global warm SW reset has occurred.
Reset Source: Power-on reset has occurred.
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
Using default environment
Board: BeagleBone Black
<ethaddr> not set. Validating first E-fuse MAC
BeagleBone Black:
BeagleBone: cape eeprom: i2c_probe: 0x54:
BeagleBone: cape eeprom: i2c_probe: 0x55:
BeagleBone: cape eeprom: i2c_probe: 0x56:
BeagleBone: cape eeprom: i2c_probe: 0x57:
Net: eth0: MII MODE
cpsw, usb_ether
Press SPACE to abort autoboot in 2 seconds
board_name=[A335BNLT] ...
board_rev=[00A5] ...
switch to partitions #0, OK
mmc0 is current device
SD/MMC found on device 0
** Bad device 0:2 0x82000000 **
** Bad device 0:2 0x82000000 **
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
gpio: pin 56 (gpio 56) value is 0
gpio: pin 55 (gpio 55) value is 0
gpio: pin 54 (gpio 54) value is 0
gpio: pin 53 (gpio 53) value is 1
switch to partitions #0, OK
mmc0 is current device
gpio: pin 54 (gpio 54) value is 1
*
U-Boot SPL 2018.01-00002-ge9ff418fb8 (Feb 20 2018 - 20:14:57)
Trying to boot from MMC2
U-Boot 2018.01-00002-ge9ff418fb8 (Feb 20 2018 - 20:14:57 -0600), Build:
jenkins-github_Bootloader-Builder-38
CPU : AM335X-GP rev 2.1
I2C: ready
DRAM: 512 MiB
No match for driver 'omap_hsmmc'
No match for driver 'omap_hsmmc'
Some drivers were not found
Reset Source: Power-on reset has occurred.
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
Using default environment
Board: BeagleBone Black
<ethaddr> not set. Validating first E-fuse MAC
BeagleBone Black:
BeagleBone: cape eeprom: i2c_probe: 0x54:
BeagleBone: cape eeprom: i2c_probe: 0x55:
BeagleBone: cape eeprom: i2c_probe: 0x56:
BeagleBone: cape eeprom: i2c_probe: 0x57:
Net: eth0: MII MODE
cpsw, usb_ether
Press SPACE to abort autoboot in 2 seconds
board_name=[A335BNLT] ...
board_rev=[00A5] ...
data abort
pc : [<9ff55336>] lr : [<9ff4f5a3>]
reloc pc : [<80811336>] lr : [<8080b5a3>]
sp : 9df23bc8 ip : 9ff9dc6c fp : 00000018
r10: 9df29a60 r9 : 9df23ed8 r8 : 00000000
r7 : 00000000 r6 : 00000000 r5 : 9df29a60 r4 : e0c00000
r3 : 00002383 r2 : 01000000 r1 : 00000000 r0 : 9df299ea
Flags: NzCv IRQs off FIQs on Mode SVC_32
Resetting CPU ...
resetting ...
U-Boot SPL 2018.01-00002-ge9ff418fb8 (Feb 20 2018 - 20:14:57)
Trying to boot from MMC2
U-Boot 2018.01-00002-ge9ff418fb8 (Feb 20 2018 - 20:14:57 -0600), Build:
jenkins-github_Bootloader-Builder-38
CPU : AM335X-GP rev 2.1
I2C: ready
DRAM: 512 MiB
No match for driver 'omap_hsmmc'
No match for driver 'omap_hsmmc'
Some drivers were not found
Reset Source: Global warm SW reset has occurred.
Reset Source: Power-on reset has occurred.
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
Using default environment
Board: BeagleBone Black
<ethaddr> not set. Validating first E-fuse MAC
BeagleBone Black:
BeagleBone: cape eeprom: i2c_probe: 0x54:
BeagleBone: cape eeprom: i2c_probe: 0x55:
BeagleBone: cape eeprom: i2c_probe: 0x56:
BeagleBone: cape eeprom: i2c_probe: 0x57:
Net: eth0: MII MODE
cpsw, usb_ether
Press SPACE to abort autoboot in 2 seconds
board_name=[A335BNLT] ...
board_rev=[00A5] ...
Card did not respond to voltage select!
mmc_init: -95, time 12
Card did not respond to voltage select!
mmc_init: -95, time 13
Card did not respond to voltage select!
mmc_init: -95, time 12
gpio: pin 56 (gpio 56) value is 0
gpio: pin 55 (gpio 55) value is 0
gpio: pin 54 (gpio 54) value is 0
gpio: pin 53 (gpio 53) value is 1
Card did not respond to voltage select!
mmc_init: -95, time 12
Card did not respond to voltage select!
mmc_init: -95, time 12
switch to partitions #0, OK
mmc1(part 0) is current device
Scanning mmc 1:1...
gpio: pin 56 (gpio 56) value is 0
gpio: pin 55 (gpio 55) value is 0
gpio: pin 54 (gpio 54) value is 0
gpio: pin 53 (gpio 53) value is 1
switch to partitions #0, OK
mmc1(part 0) is current device
gpio: pin 54 (gpio 54) value is 1
Checking for: /uEnv.txt ...
Checking for: /boot.scr ...
Checking for: /boot/boot.scr ...
Checking for: /boot/uEnv.txt ...
gpio: pin 55 (gpio 55) value is 1
1867 bytes read in 15 ms (121.1 KiB/s)
Loaded environment from /boot/uEnv.txt
Checking if uname_r is set in /boot/uEnv.txt...
gpio: pin 56 (gpio 56) value is 1
Running uname_boot ...
prefetch abort
pc : [<fffffffc>] lr : [<9ff4f5a3>]
reloc pc : [<e08bbffc>] lr : [<8080b5a3>]
sp : 9df23568 ip : 00000020 fp : 9df235e4
r10: 00000001 r9 : 9df23ed8 r8 : 00000003
r7 : 00000000 r6 : 9df46020 r5 : 00000000 r4 : 00000000
r3 : 9df460c0 r2 : 00000000 r1 : f4611000 r0 : 9df46118
Flags: Nzcv IRQs off FIQs on Mode SVC_32
Resetting CPU ...
resetting ...
U-Boot SPL 2018.01-00002-ge9ff418fb8 (Feb 20 2018 - 20:14:57)
Trying to boot from MMC2
U-Boot 2018.01-00002-ge9ff418fb8 (Feb 20 2018 - 20:14:57 -0600), Build:
jenkins-github_Bootloader-Builder-38
CPU : AM335X-GP rev 2.1
I2C: ready
DRAM: 512 MiB
No match for driver 'omap_hsmmc'
No match for driver 'omap_hsmmc'
Some drivers were not found
Reset Source: Global warm SW reset has occurred.
Reset Source: Power-on reset has occurred.
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
Using default environment
Board: BeagleBone Black
<ethaddr> not set. Validating first E-fuse MAC
BeagleBone Black:
BeagleBone: cape eeprom: i2c_probe: 0x54:
BeagleBone: cape eeprom: i2c_probe: 0x55:
BeagleBone: cape eeprom: i2c_probe: 0x56:
BeagleBone: cape eeprom: i2c_probe: 0x57:
Net: eth0: MII MODE
cpsw, usb_ether
Press SPACE to abort autoboot in 2 seconds
board_name=[A335BNLT] ...
board_rev=[00A5] ...
Card did not respond to voltage select!
mmc_init: -95, time 12
Card did not respond to voltage select!
mmc_init: -95, time 13
Card did not respond to voltage select!
mmc_init: -95, time 13
gpio: pin 56 (gpio 56) value is 0
gpio: pin 55 (gpio 55) value is 0
gpio: pin 54 (gpio 54) value is 0
gpio: pin 53 (gpio 53) value is 1
Card did not respond to voltage select!
mmc_init: -95, time 12
Card did not respond to voltage select!
mmc_init: -95, time 12
switch to partitions #0, OK
mmc1(part 0) is current device
Scanning mmc 1:1...
data abort
pc : [<9ff554f2>] lr : [<9ff4f5c7>]
reloc pc : [<808114f2>] lr : [<8080b5c7>]
sp : 9df23428 ip : 9ff9dd6c fp : 9df28c50
r10: 9ff9db60 r9 : 9df23ed8 r8 : 00000000
r7 : 9df234b4 r6 : 9ff9dc4c r5 : 9df28c60 r4 : 00000018
r3 : 9df29f70 r2 : 9df28bb8 r1 : 00000000 r0 : 9df29d48
Flags: Nzcv IRQs off FIQs on Mode SVC_32
Resetting CPU ...
resetting ...
U-Boot SPL 2018.01-00002-ge9ff418fb8 (Feb 20 2018 - 20:14:57)
Trying to boot from MMC2
U-Boot 2018.01-00002-ge9ff418fb8 (Feb 20 2018 - 20:14:57 -0600), Build:
jenkins-github_Bootloader-Builder-38
CPU : AM335X-GP rev 2.1
I2C: ready
DRAM: 512 MiB
No match for driver 'omap_hsmmc'
No match for driver 'omap_hsmmc'
Some drivers were not found
Reset Source: Global warm SW reset has occurred.
Reset Source: Power-on reset has occurred.
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
Using default environment
Board: BeagleBone Black
<ethaddr> not set. Validating first E-fuse MAC
BeagleBone Black:
BeagleBone: cape eeprom: i2c_probe: 0x54:
BeagleBone: cape eeprom: i2c_probe: 0x55:
BeagleBone: cape eeprom: i2c_probe: 0x56:
BeagleBone: cape eeprom: i2c_probe: 0x57:
Net: eth0: MII MODE
cpsw, usb_ether
Press SPACE to abort autoboot in 2 seconds
board_name=[A335BNLT] ...
board_rev=[00A5] ...
Card did not respond to voltage select!
mmc_init: -95, time 12
Card did not respond to voltage select!
mmc_init: -95, time 13
Card did not respond to voltage select!
mmc_init: -95, time 13
gpio: pin 56 (gpio 56) value is 0
gpio: pin 55 (gpio 55) value is 0
gpio: pin 54 (gpio 54) value is 0
gpio: pin 53 (gpio 53) value is 1
Card did not respond to voltage select!
mmc_init: -95, time 12
Card did not respond to voltage select!
mmc_init: -95, time 12
switch to partitions #0, OK
mmc1(part 0) is current device
Scanning mmc 1:1...
btrfs_read_superblock: invalid checksum at superblock mirror 0
btrfs_read_superblock: invalid checksum at superblock mirror 1
btrfs_read_superblock: No valid BTRFS superblock found!
** Unrecognized filesystem type **
gpio: pin 56 (gpio 56) value is 0
gpio: pin 55 (gpio 55) value is 0
gpio: pin 54 (gpio 54) value is 0
gpio: pin 53 (gpio 53) value is 1
switch to partitions #0, OK
mmc1(part 0) is current device
gpio: pin 54 (gpio 54) value is 1
Checking for: /uEnv.txt ...
data abort
pc : [<9ff55404>] lr : [<9ff6de8d>]
reloc pc : [<80811404>] lr : [<80829e8d>]
sp : 9df235e0 ip : 9df3704c fp : 9df23600
r10: 000000c0 r9 : 9df23ed8 r8 : 9df23659
r7 : 9ff9dc84 r6 : 9df37048 r5 : 00000000 r4 : 9ff9dc5c
r3 : 9df36f80 r2 : 00000000 r1 : 00002080 r0 : 00000000
Flags: nzcv IRQs off FIQs on Mode SVC_32
Resetting CPU ...
resetting ...
U-Boot SPL 2018.01-00002-ge9ff418fb8 (Feb 20 2018 - 20:14:57)
Trying to boot from MMC2
U-Boot 2018.01-00002-ge9ff418fb8 (Feb 20 2018 - 20:14:57 -0600), Build:
jenkins-github_Bootloader-Builder-38
CPU : AM335X-GP rev 2.1
I2C: ready
DRAM: 512 MiB
No match for driver 'omap_hsmmc'
No match for driver 'omap_hsmmc'
Some drivers were not found
Reset Source: Global warm SW reset has occurred.
Reset Source: Power-on reset has occurred.
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
Using default environment
Board: BeagleBone Black
<ethaddr> not set. Validating first E-fuse MAC
BeagleBone Black:
BeagleBone: cape eeprom: i2c_probe: 0x54:
BeagleBone: cape eeprom: i2c_probe: 0x55:
BeagleBone: cape eeprom: i2c_probe: 0x56:
BeagleBone: cape eeprom: i2c_probe: 0x57:
Net: eth0: MII MODE
cpsw, usb_ether
Press SPACE to abort autoboot in 2 seconds
board_name=[A335BNLT] ...
board_rev=[00A5] ...
data abort
pc : [<9ff55404>] lr : [<9ff4f585>]
reloc pc : [<80811404>] lr : [<8080b585>]
sp : 9df23af8 ip : 9ff9dc6c fp : 00000018
r10: 9df34e50 r9 : 9df23ed8 r8 : 00000000
r7 : 9df35000 r6 : 9df34e70 r5 : 00000005 r4 : 9ff9dc4c
r3 : 9df34e48 r2 : 00000000 r1 : 00000028 r0 : 00000000
Flags: nzcv IRQs off FIQs on Mode SVC_32
Resetting CPU ...
resetting ...
U-Boot SPL 2018.01-00002-ge9ff418fb8 (Feb 20 2018 - 20:14:57)
Trying to boot from MMC2
U-Boot 2018.01-00002-ge9ff418fb8 (Feb 20 2018 - 20:14:57 -0600), Build:
jenkins-github_Bootloader-Builder-38
CPU : AM335X-GP rev 2.1
I2C: ready
DRAM: 512 MiB
No match for driver 'omap_hsmmc'
No match for driver 'omap_hsmmc'
Some drivers were not found
Reset Source: Global warm SW reset has occurred.
Reset Source: Power-on reset has occurred.
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
Using default environment
Board: BeagleBone Black
<ethaddr> not set. Validating first E-fuse MAC
BeagleBone Black:
BeagleBone: cape eeprom: i2c_probe: 0x54:
BeagleBone: cape eeprom: i2c_probe: 0x55:
BeagleBone: cape eeprom: i2c_probe: 0x56:
BeagleBone: cape eeprom: i2c_probe: 0x57:
Net: eth0: MII MODE
cpsw, usb_ether
Press SPACE to abort autoboot in 2 seconds
board_name=[A335BNLT] ...
board_rev=[00A5] ...
data abort
pc : [<9ff55404>] lr : [<9ff4f585>]
reloc pc : [<80811404>] lr : [<8080b585>]
sp : 9df23c28 ip : 9ff9dc6c fp : 00000018
r10: 9df2b228 r9 : 9df23ed8 r8 : 00000000
r7 : 9df34e88 r6 : 9df34e48 r5 : 544c4e42 r4 : 9ff9dc4c
r3 : 9df34e28 r2 : 00000000 r1 : 00000040 r0 : 35333341
Flags: NzcV IRQs off FIQs on Mode SVC_32
Resetting CPU ...
resetting ...
