Also, 

I think there are 2-3 variants of the mating hirose connector.  I believe 
the differences are in the "heights" of the connector variants, so you may 
need to take that into account as well..
   

On Thursday, April 12, 2018 at 7:56:57 AM UTC-5, Jeff Andich wrote:
>
> We made our own PCBA expansion board using this connector.  It only breaks 
> out only 30/60 of the signals and has a single layer, so high speed signals 
> might be an issue.  Also, the mating hirose connector is reversed 180 
> degrees with respect to the connector on the BB-X15...
>
>
>
> On Thursday, April 12, 2018 at 7:50:31 AM UTC-5, Jeff Andich wrote:
>>
>>
>> https://www.digikey.com/products/en/connectors-interconnects/20?keywords=FX18-60S-0.8SV15+&pkeyword=FX18-60S-0.8SV15+&v=26
>>
>>
>> I wish the distributors (Digikey, Mouser, etc) of the BB-X15 would list 
>> this on the same page as the BB-X15...
>>
>>
>>
>>
>> On Thursday, April 12, 2018 at 7:12:21 AM UTC-5, kamesh wrote:
>>>
>>> Hello Gerald, 
>>>
>>> Thanks for your mail. I tried to search for that connector, but could 
>>> not find it. Hence I am posting it here. 
>>>
>>> The Beagle board has FX18ā€60Pā€0.8SV connector. A suitable receptacle 
>>> for that is FX18-60S-0.8SV15. To get access to GPIO pins to do some 
>>> LED blinking for example, I would need FX18-60S-0.8SV15 to some sort 
>>> of a GPIO expansion header. I could not find such a thing. Do you have 
>>> any recommendation for that type of a connector? 
>>>
>>> Thank again, 
>>> Naveen 
>>>
>>> On Thu, Apr 12, 2018 at 12:56 PM, Gerald Coley <gco...@emprodesign.com> 
>>> wrote: 
>>> > All you need is a connector that plugs into the connector on the X15 
>>> that 
>>> > connects it to whatever connector you like. A schematic would connect 
>>> the 
>>> > pins together in whatever order you like. 
>>> > 
>>> > 
>>> > 
>>> > Gerald 
>>> > 
>>> > 
>>> > 
>>> > 
>>> > 
>>> > From: beagl...@googlegroups.com [mailto:beagl...@googlegroups.com] On 
>>> > Behalf Of kamesh 
>>> > Sent: Thursday, April 12, 2018 3:52 AM 
>>> > To: BeagleBoard <beagl...@googlegroups.com> 
>>> > Subject: Re: [beagleboard] Re: X15 - any expansion boards for GPIO 
>>> access? 
>>> > 
>>> > 
>>> > 
>>> > Hello Gerald, 
>>> > 
>>> > Do you have the schematics of the breakout board for accessing GPIO's 
>>> > somewhere in github? I would like to design my own adapter board with 
>>> > matching connectors for my experiments. 
>>> > 
>>> > Thank you very much for your time. 
>>> > 
>>> > Best 
>>> > Naveen 
>>> > 
>>> > On Monday, November 13, 2017 at 11:45:39 PM UTC+1, gcoley1 wrote: 
>>> > 
>>> > I have something, but not tested. Not sure when I can get to it. 
>>> > 
>>> > 
>>> > 
>>> > Gerald 
>>> > 
>>> > 
>>> > 
>>> > From: beagl...@googlegroups.com [mailto:beagl...@googlegroups.com] On 
>>> Behalf 
>>> > Of Jeff Andich 
>>> > Sent: Monday, November 13, 2017 4:42 PM 
>>> > To: BeagleBoard <beagl...@googlegroups.com> 
>>> > Subject: [beagleboard] Re: X15 - any expansion boards for GPIO access? 
>>> > 
>>> > 
>>> > 
>>> > Hi, 
>>> > 
>>> > 
>>> > 
>>> > I cannot find the post, but a few months ago, I asked if there was a 
>>> > breakout board planned for the 4 expansion headers on the X15.  I 
>>> THINK 
>>> > Gerald responded by indicating that he had something already designed, 
>>> but 
>>> > that he hadn't yet had the chance to release it and get it into the 
>>> > production pipeline. 
>>> > 
>>> > 
>>> > 
>>> > I'm sure that if there are any updates to that status, the BeagleBoard 
>>> folks 
>>> > will update everyone on this forum accordingly. 
>>> > 
>>> > 
>>> > 
>>> > 
>>> > 
>>> > 
>>> > On Sunday, November 12, 2017 at 4:36:11 PM UTC-6, David Stein wrote: 
>>> > 
>>> > I purchased an X15 for a project that involves, in part, driving three 
>>> or 
>>> > four LEDs and detecting some simple button-presses. I've been planning 
>>> on 
>>> > using the GPIO pins, and of course the X15 has plenty - but they're 
>>> > accessible through a surface-mounted expansion port. 
>>> > 
>>> > 
>>> > 
>>> > It looks like I'll need a breakout board to provide header pins. I'm 
>>> not 
>>> > finding anything directly relevant. 
>>> > 
>>> > 
>>> > 
>>> > Here's what I've found: 
>>> > 
>>> > 
>>> > 
>>> > * Some posts from 2015 about the need for such a board soon after the 
>>> X15 
>>> > was released, but apparently no follow-up. 
>>> > 
>>> > 
>>> > 
>>> > * A post identifying the connector type for the expansion ports 
>>> (Hirose 
>>> > FX18-60S-0.8SV15), and some ancillary discussion of breakouts that 
>>> > referenced a PCI-e TI expansion board (AMxxxx?), but the conversation 
>>> kind 
>>> > of petered out without resolution. 
>>> > 
>>> > 
>>> > 
>>> > And... that's about it. Anyone have other info? Thank you for your 
>>> help. 
>>> > 
>>> > -- 
>>> > For more options, visit http://beagleboard.org/discuss 
>>> > --- 
>>> > You received this message because you are subscribed to the Google 
>>> Groups 
>>> > "BeagleBoard" group. 
>>> > To unsubscribe from this group and stop receiving emails from it, send 
>>> an 
>>> > email to beagleboard...@googlegroups.com. 
>>> > To view this discussion on the web visit 
>>> > 
>>> https://groups.google.com/d/msgid/beagleboard/8a6320f8-6a6d-4ebd-b8c9-ae9e4b522f48%40googlegroups.com.
>>>  
>>>
>>> > For more options, visit https://groups.google.com/d/optout. 
>>> > 
>>> > -- 
>>> > For more options, visit http://beagleboard.org/discuss 
>>> > --- 
>>> > You received this message because you are subscribed to the Google 
>>> Groups 
>>> > "BeagleBoard" group. 
>>> > To unsubscribe from this group and stop receiving emails from it, send 
>>> an 
>>> > email to beagleboard...@googlegroups.com. 
>>> > To view this discussion on the web visit 
>>> > 
>>> https://groups.google.com/d/msgid/beagleboard/da99cf85-59f5-49c6-9006-3b72277e263d%40googlegroups.com.
>>>  
>>>
>>> > For more options, visit https://groups.google.com/d/optout. 
>>> > 
>>> > -- 
>>> > For more options, visit http://beagleboard.org/discuss 
>>> > --- 
>>> > You received this message because you are subscribed to a topic in the 
>>> > Google Groups "BeagleBoard" group. 
>>> > To unsubscribe from this topic, visit 
>>> > https://groups.google.com/d/topic/beagleboard/Bjftz6CpHZ4/unsubscribe. 
>>>
>>> > To unsubscribe from this group and all its topics, send an email to 
>>> > beagleboard...@googlegroups.com. 
>>> > To view this discussion on the web visit 
>>> > 
>>> https://groups.google.com/d/msgid/beagleboard/2d348677e5164e2ca0532a59039a6730%40winhexbeus11.winus.mail.
>>>  
>>>
>>> > 
>>> > For more options, visit https://groups.google.com/d/optout. 
>>>
>>>
>>>
>>> -- 
>>> Kameswar Rao Vaddina, 
>>> Postdoctoral researcher, 
>>> Department of Computer and Information Science (IDI), 
>>> Norwegian University of Science and Technology. 
>>>
>>> Web : http://folk.ntnu.no/kameswav/ 
>>> E-mail <http://folk.ntnu.no/kameswav/E-mail> : kameswar...@idi.ntnu.no 
>>> Mobile : +358 440992996 
>>>
>>

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/d5ba6e30-aee7-42d9-a115-188dbdd8e583%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to