Hello,
I'm using the Debian 9.3 2018-01-28 4GB SD LXQT
<http://debian.beagleboard.org/images/bone-debian-9.3-lxqt-armhf-2018-01-28-4gb.img.xz>
image.
I need to configure a static IP, I have modified the
/etc/network/interfices file. But when I reboot the system, the IP hasn't
changed.
Can you help me?
Here is the file:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# Static IP
auto eth0
iface eth0 inet static
address 172.16.0.189
netmask 255.255.255.0
gateway 172.16.0.254
broadcast 172.16.0.255
dns-nameservers 8.8.8.8
# The primary network interface
#auto eth0
#iface eth0 inet dhcp
# Example to keep MAC address between reboots
#hwaddress ether DE:AD:BE:EF:CA:FE
##connman: ethX static config
#connmanctl services
#Using the appropriate ethernet service, tell connman to setup a static IP
addr$
#sudo connmanctl config <service> --ipv4 manual <ip_addr> <netmask>
<gateway> -$
##connman: WiFi
#
#connmanctl
#connmanctl> tether wifi off
#connmanctl> enable wifi
#connmanctl> scan wifi
#connmanctl> services
#connmanctl> agent on
#connmanctl> connect wifi_*_managed_psk
#connmanctl> quit
# Ethernet/RNDIS gadget (g_ether)
# Used by: /opt/scripts/boot/autoconfigure_usb0.sh
#iface usb0 inet static
# address 192.168.7.2
# netmask 255.255.255.252
# network 192.168.7.0
# gateway 192.168.7.1
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/f68c4e5f-627d-4b7b-8bd4-2c8bb991fcee%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
