here are some pages i found that might be helpful. once booted an image can be written to the eMMC. I have not tried this yet.
some help on serial booting. https://e2e.ti.com/support/arm/sitara_arm/f/791/t/169883?AM335x-Beaglebone-boot-over-UART Ethernet boot http://processors.wiki.ti.com/index.php/Ubuntu_12.04_Set_Up_to_Network_Boot_an_AM335x_Based_Platform On Wednesday, May 23, 2018 at 6:32:07 PM UTC-6, Harry wrote: > > > Hello all, > > I am wondering if there is a method to flash the eMMC on the BBB by using > serial commands or the USB port? I am trying to automate the flashing step > and do not want to use an SD card, as this is a manual process. > > Thanks for your help! > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/9fde50ec-1b26-42db-b2f3-a977aa2cedaa%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
