The output is listing is from the PINS file. On Friday, August 3, 2018 at 10:55:00 AM UTC-4, gem...@gmail.com wrote: > > I would like to use pin P9_42 as a standard gpio pin to control a device. > However, it seems I am getting a repeating 17 pulses over 4 seconds with a > 1 second pause on P9-42. Using "config-pin -a P9.42 in" the pulses stop, > but I cannot use this pin as gpio. As soon as I set it to out the pulses > start up again. > > gpio-7 (ECAP0_IN_PWM0_OUT |P9_42 ) out lo > gpio-114 (MCASP0_ACLKR |P9_92 ) in lo > > Not sure how to stop the pulses. Any ideas out there? >
-- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/4fea086e-4900-4f13-a8aa-5c853a6065eb%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
