Hello, I'm Davide and this is my first post in this group. I'm using a BBB and I've installed the last image of Debian http://debian.beagleboard.org/images/bone-debian-9.4-lxqt-armhf-2018-06-17-4gb.img.xz. Kernel version Linux beaglebone 4.14.49-ti-r54 #1 SMP PREEMPT Fri Jun 15 22:14:13 UTC 2018 armv7l GNU/Linux There are two things that for me are inexplicable:
1. I connected the TFT cape 4DCAPE-70T, at first it didn't work, but <https://forum.4dsystems.com.au/forum/forum-aa/4d-systems-hardware/beaglebone-display-modules-and-capes/48208-4dcape-70t-problems> I make it work adding in /boot/uEnv.txt: dtb_overlay=/lib/firmware/BB-BONE-LCD7-01-00A3.dtbo (would it be the same to use uboot_overlay_addr0=... ???) disable_uboot_overlay_video=1 disable_uboot_overly_adc=1 if I comment these lines out, the display still works!!! How is it possible? 2. Even though in /etc/network/interfaces there are no eth0 interface available. If I list all the board connection there is an eth0 dhcp connection, and I cannot remove it? Thank you for the attention. Davide -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/9945fa8d-1ad6-4d6f-9d76-57c4a850d908%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
