Hi everyone, I am not able to enable any GPIO pins and then toggle them using (for eg: config-pin P8.7 gpio) command.
debian@beaglebone:~$ config-pin P8.7 gpio P8_07 pinmux file not found! Pin has no cape: P8_07 Actually in uEnv.txt i have disabled uboot-overlays because when i enable it i am not able to play audio.when i disable it i am able to play audio. ###Master Enable #enable_uboot_overlays=1 ###Cape Universal Enable enable_uboot_cape_universal=1 (i enabled cape-universal also but as uboot-overlay is disabled cape-universal is also not working i guess) cape_enable=bone_capemgr.enable_partno=BB-UART2,BB-UART4,BB-BONE-AUDI-02 (this is to enable audio) So i just want to know is there any other way to enable GPIO other than uboot-overlay(cape-universal) as i cant compromise on audio. Audio is must for my project. I have tried multiple ways for audio.only this method worked. So i want alternative way for enabling GPIO. Please help ASAP. Thanks in advance. Jithu -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/bdce1fbd-2f5f-4897-bf2c-cd42c1949216%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
