On Wed, Aug 29, 2018 at 3:05 PM Thomas <tremm...@lonestartracking.com> wrote:
>
> Robert,
> Your help is much appreciated!  Making progress I think...  Well, kind of...
>
> So I attempted to replace target = <&ocp>; with target = "/"  (when it should 
> have been target-path)
>
> I didnt notice the typo and applied the overlay in uEnv.txt and rebooted.  
> Now, I can not connect to the device.  When I hit the reset button, the 
> networking stack is brought up, so I can ping the device, but that is it.  No 
> SSH.  So I connected a USB cable, and it appears that I am having issues with 
> it also...  The PC is not creating the ethernet adapter when the cable is 
> connected.
>
> Any thoughts as to how to recover from this state besides trying to re-flash 
> the device?

If you were using the microSD, i'd say to just fix it.. But with the
eMMC, you'll pretty much need a reflash.  U-Boot currently doesn't
have any error detection when applying overlays.. Everything just
breaks in bootup..

Regards,

-- 
Robert Nelson
https://rcn-ee.com/

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/CAOCHtYiXEPgf4W4sLm_oW9KCkB-YbcpHWFSOZwJoob77H07ogA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to