On Thursday, September 6, 2018 at 5:18:07 PM UTC-4, RobertCNelson wrote: > > > Just to confirm details, please restate the steps you did from the output > of the image builder script to sdcard. >
Sure! This is based on a pull of github.com/beagleboard/image-builder over the long weekend (which I think hasn't changed since): time ./RootStock-NG.sh -c rcn-ee_console_debian_stretch_armhf cd debian-9.5-console-armhf-2018-09-06 sudo ./setup_sdcard.sh --img-4gb ../BBB-eMMC-debian-9.5-console-armhf-2018-09-06 --dtb beaglebone --enable-systemd --bbb-old-bootloader-in-emmc --rootfs btrfs Now the flashing part is a bit odd but I don't think it is part of the problem (since I saw the same issue when installing via a flasher). I'm using a variant of BBBlfs and the SPL/uboot binaries from https://github.com/ravikp7/node-beagle-boot to boot the BBB into USB Mass Storage mode and then mount the eMMC as /dev/sda, Finally, I dd the image to /dev/sda, mount /dev/sda1 and fix /etc/fstab (otherwise it won't boot!). Just for sanity I will rebuild the rcn-ee_console_debian_stretch_armhf but with a flasher and retry that. Thanks! -W -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/00c6c517-18c4-4353-9dae-999eae7a5258%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
