Hello,
I am trying to boot up my custom board by bypassing the board ID check.
Therefore, I am following this guide to update u-boot and install it on a
microSD card that has Debian Stretch IoT 9.4.
All the steps till step 6 worked fine. So, I was able to build the new
u-boot. The lsblk command showed that my memory card is called 'sdd'.
After typing:
$ export DISK=/dev/sdd
$ sudo dd if=./u-boot/MLO of=${DISK} count=1 seek=1 bs=128k
This showed up:
dd: failed to open './u-boot/MLO': Not a directory
Any ideas how to solve this issue?
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/0d9c915d-911b-48fa-8b98-5d412174853c%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
