Howdy, I'm currently trying to get an ethernet port to work with my PocketBeagle, and can't figure out why it won't work.
I've edited the uEnv.txt file as follows: ###Overide capes with eeprom uboot_overlay_addr0=/lib/firmware/PB-SPI0-ETH-CLICK.dtbo #uboot_overlay_addr1=/lib/firmware/PB-SPI1-ETH-CLICK.dtbo #uboot_overlay_addr2=/lib/firmware/BB-SPIDEV0-00A0.dtbo #uboot_overlay_addr1=/lib/firmware/<file1>.dtbo #uboot_overlay_addr2=/lib/firmware/<file2>.dtbo #uboot_overlay_addr3=/lib/firmware/<file3>.dtbo I can also see that in /dev the spidev2.0 and spidev2.1 are listed, which to my understanding means that they are enabled. I've thus tried to just plug the Eth Wiz Click into the PocketBeagle and it powers up, but it won't connect to my computer via ethernet. I tried using the ETH-WIZ-CLICK.dtbo but none of the SPI lines would ever show up in /dev. I've also configured the pins to be in SPI mode, so I'm not sure what I could be missing. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/b7c37b7b-40aa-4f51-9dd7-096e91c421d0%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
