Hi,
When I used beaglebone Black from image Debian 9.5 2018-08-30 4GB SD IoT (https://debian.beagleboard.org/images/bone-debian-9.5-iot-armhf-2018-08-30-4gb.img.xz) <https://debian.beagleboard.org/images/bone-debian-9.5-iot-armhf-2018-08-30-4gb.img.xz> and I want to enable I2C, CAN bus and UART I can set from /boot/uEnv.txt inline *cape_enable=bone_capemgr.enable_partno=BB-CAN1, BB-I2C2, BB-UART2, BB-UART3, BB-UART4* and When I want to show it with command: *cat /sys/devices/platform/bone_capemgr/slots* it can show cape_slots no problem. But when bought BEAGLEBOARD-X15 <http://www.ti.com/tool/BEAGLEBOARD-X15> and Install image *bbx15-debian-9.5-iot-armhf-2018-09-23-4gb.img.xz (https://rcn-ee.com/rootfs/bb.org/testing/2018-09-23/stretch-iot/bbx15-debian-9.5-iot-armhf-2018-09-23-4gb.img.xz <https://rcn-ee.com/rootfs/bb.org/testing/2018-09-23/stretch-iot/bbx15-debian-9.5-iot-armhf-2018-09-23-4gb.img.xz> )* it can run on debian no problem but I found when i want to enable interface it cannot open. and don't have *bone_capemgr/slots* in */sys/devices/platform* My goal is want to use CAN bus, UART, I2C from expansion pinout under board follow in BEAGLEBOARD_X15_REV_B1 schematic [image: 2018-09-27_160423.png] system: uboot 2017.01 kernel linux 4.14.71-ti-rt-r69 root file debian 9.5 -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/c8fdade5-d41f-48f5-9db6-fa38bea45778%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
