I can't get the BBB to boot from eMMC or SD. The following is what I get on the serial terminal at start:
U-Boot SPL 2018.03-00002-gac9cce7c6a (Apr 05 2018 - 13:07:46 -0500) Trying to boot from MMC1 Loading Environment from EXT4... ** File not found /boot/uboot.env ** ** Unable to read "/boot/uboot.env" from mmc0:1 ** Failed (-5) mmc_load_image_raw_sector: mmc block read error Loading Environment from EXT4... ** Can't read partition table on 0:0 ** ** Invalid partition 1 ** Failed (-5) ** Can't read partition table on 0:0 ** ** Partition 1 not valid on device 0 ** spl_register_fat_device: fat register err - -1 spl_load_image_fat: error reading image u-boot.img, err - -1 Loading Environment from EXT4... ** Can't read partition table on 0:0 ** ** Invalid partition 1 ** Failed (-5) bad MBR sector signature 0x2f40 spl: no partition table found SPL: failed to boot from all boot devices ### ERROR ### Please RESET the board ### I am trying to use this image flashed to SD 'bone-debian-9.4-iot-armhf-2018-06-17-4gb.img' I get it to boot off a card using this image 'beaglelogic-stretch-2017-07-13-4gb.img'. Did something change on the latest image that is not compatible with my beaglebone? Thanks, Travis -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/f98c8724-f491-448b-96bc-195de5f1e172%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
