Thanks for the suggestion, Robert. I have attached the complete output. The relevant section is pasted here:
uboot_overlays: loading /lib/firmware/MEM.dtbo ...
418 bytes read in 94 ms (3.9 KiB/s)
failed on fdt_overlay_apply(): FDT_ERR_BADOVERLAY
Not exactly sure what it means.
Thanks
Gaurav
On Tuesday, October 9, 2018 at 5:16:03 PM UTC-5, RobertCNelson wrote:
>
> On Tue, Oct 9, 2018 at 5:09 PM GS <[email protected] <javascript:>>
> wrote:
> >
> > Robert/other device tree experts,
> > Apparently using u-boot to load the compiled dtbo bricks the beaglebone.
> The device does not complete boot up and all 4 led's remain on
> (ethernet/usb is non responsive too). I am wondering if U-boot is the right
> way to do it?
>
> For starters, grab a usb-serial adapter and plug it into j1 to see
> what's really happening..
>
> Regards,
>
> --
> Robert Nelson
> https://rcn-ee.com/
>
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/04cb8d4d-83d7-4054-a330-d648db1f1b42%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
BootFailSerialOutput_10092018
Description: Binary data
