On Fri, Oct 19, 2018 at 12:59 PM TJF <[email protected]> wrote: > > Thanks for the fast response. > > No changes for PocketBeagle.dts or BeagleBone_Blue.dts? (P9_11 = P2_05 = > DSM2_3)
Not yet, still figuring out: > And P9_42 (GPIO3_18) is mode 0x24 after boot (not 0x27). We want "gpio" by default right? 0x24 is spi_clk.. > And i2c2 (P9_19, P9_20) are mode 0x33 after boot (not 0x3B). I think 0x3B is 0x33 + slew control on, re-reading the am335x manual.. u-boot sets it as: https://github.com/u-boot/u-boot/blob/master/board/ti/am335x/mux.c#L107 Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYjYwQ1czB8icu50nBRr9wYRXQzgc_uJUdW1-_p8%3DKkqBg%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
