Hi Folks, I tossed together a pocketbeagle cape using Circuitmaker last week.. After I get my protos back I was planning on fixing any mechanical issues I have and creating a pocketCape template project like the BeagleBoard cape template that I've used several times.
If anyone wants to take the time to look and provide some constructive criticism I'd be happy to hear it as I'm sure I'll be rolling the board anyway, this one was tossed together fast. https://workspace.circuitmaker.com/Projects/Details/David-Lowe-2/PocketBeagle-Automotive-Cape And I have a couple of questions: 1) I added the I2C eeprom that we use to support the device tree overlay support for the BeagleBoard. Is this facility going to work on the PocketBeagle? It seems the BBB support has been hit and miss over distro updates. 2) I had a hard time finding current requirements of the PocketBeagle, Can someone point me to the consumption data? 3) Can someone that has Eagle installed send me a real mechanical drawing? I made mine from empirical measurements and have noticed that it's lopsided but may still mate ok with the pocketbeagle Thanks in advance! Miller -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/cd8bf4ba-deef-48cf-ab3b-76301a4ad083%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
