I did some parts of the task, but not complete. http://youtu.be/9CxfKfjykz4 https://elinux.org/images/b/b2/Netconsole.pdf
> On Oct 30, 2018, at 10:49 AM, Robert Nelson <[email protected]> wrote: > >> On Tue, Oct 30, 2018 at 9:10 AM <[email protected]> wrote: >> >> Hello: >> >> Thanks for the valuable response. >> >> In my case I had created only BOOT partition on my SD Card and I copied the >> MLO, U-boot.img and uEnv.txt files. >> >> the content in the uEnv.txt is as follows: >> >> >> uenvcmd=setenv bootargs console=ttyUSB0,115200n8 console=${console} >> echo *** Booting To Baremetal_1 *** >> >> >> Before applying USB power to BBB, SD card is inserted and I pressed and hold >> the Switch-2 to boot from SD Card. >> >> But there is no response from the board at USB0 port. >> >> >> Is it problem with uEnv.txt file.? >> >> Are there required for any changes.? > > Plug in a usb serial adapter into the j1 debug port.. did u-boot > actually do what you expected? > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/CAOCHtYiY%2BY-4iUyu%2BbVkQC4RRMyOysThmV6dmJghF9ON-u98wQ%40mail.gmail.com. > For more options, visit https://groups.google.com/d/optout. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/C7C853D8-7EA1-4671-80EF-85109FBEE07A%40gmail.com. For more options, visit https://groups.google.com/d/optout.
