I recently purchased Radium camera cape with image sensor MT9M114, and it
came with Angstrom image with relevant driver. However, I would like the
camera cape to work with Debian distro of 3.8.13-bone79. Since for
3.8.13-bone79, the driver is by default set, ie.
CONFIG_SOC_CAMERA_MT9M114=y
After I boot up BBB with my Debian distro + camera cape, it managed to
power up the camera cape and the overlay is loaded successfully:
2: 56:P---L BeagleBone 1.2MP CAMERA CAPE,00A0,RadiumBoards,BB-BONE-CAM-VVDN
And,
# v4l2-ctl --all
Driver Info (not using libv4l2):
Driver name : cssp_camera
Card type : cssp_camera
Bus info : cssp_camera-000
Driver version: 3.8.13
Capabilities : 0x05000001
Video Capture
Read/Write
Streaming
Format Video Capture:
Width/Height : 1280/720
Pixel Format : 'YUYV'
Field : None
Bytes per Line: 640
Size Image : 153600
Colorspace : JPEG (JFIF/ITU601)
Video input : 0 (Camera 0: ok)
Priority: 2
Unfortunately, when I use try to capture image by:
fswebcam -d /dev/video0 -r 320x240 test.jpeg
--- Opening /dev/video0...
Trying source module v4l2...
/dev/video0 opened.
No input was specified, using the first.
--- Capturing frame...
Timed out waiting for frame!
No frame captured.
Any idea to overcome the problem very much appreciated.
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/3e54e69c-99d7-43d1-a0d9-df218f1c2e5c%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
