This is what I get: debian@beaglebone:/var/lib/cloud9$ sudo /opt/scripts/tools/version.sh [sudo] password for debian: git:/opt/scripts/:[1aa73453b2c980b75e31e83dab7dd8b6696f10c7] eeprom:[A335BNLT00C00816BBBK0459] model:[TI_AM335x_BeagleBone_Black] dogtag:[BeagleBoard.org Debian Image 2018-10-07] bootloader:[microSD-(push-button)]:[/dev/mmcblk0]:[U-Boot 2018.09-00002-g0b54a51eee]:[location: dd MBR] bootloader:[eMMC-(default)]:[/dev/mmcblk1]:[U-Boot 2017.01-00006-gb2bbabfe41]:[location: dd MBR] kernel:[4.14.71-ti-r80] nodejs:[v6.14.4] uboot_overlay_options:[enable_uboot_overlays=1] uboot_overlay_options:[uboot_overlay_pru=/lib/firmware/AM335X-PRU-RPROC-4-14-TI-00A0.dtbo] uboot_overlay_options:[enable_uboot_cape_universal=1] pkg check: to individually upgrade run: [sudo apt install --only-upgrade <pkg>] pkg:[bb-cape-overlays]:[4.4.20181106.0-0rcnee0~stretch+20181110] pkg:[bb-wl18xx-firmware]:[1.20180517-0rcnee0~stretch+20180517] pkg:[kmod]:[23-2rcnee1~stretch+20171005] pkg:[librobotcontrol]:[1.0.4-git20181108.0-0rcnee0~stretch+20181110] pkg:[firmware-ti-connectivity]:[20170823-1rcnee1~stretch+20180328] groups:[debian : debian adm kmem dialout cdrom floppy audio dip video plugdev users systemd-journal i2c bluetooth netdev cloud9ide gpio pwm eqep admin spi tisdk weston-launch xenomai] cmdline:[console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 quiet] dmesg | grep pinctrl-single [ 1.062794] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 1.382856] pinctrl-single 44e10800.pinmux: pin PIN40 already requested by panel; cannot claim for 0-0070 [ 1.392593] pinctrl-single 44e10800.pinmux: pin-40 (0-0070) status -22 [ 1.399186] pinctrl-single 44e10800.pinmux: could not request pin 40 (PIN40) from group nxp_hdmi_bonelt_pins on device pinctrl-single dmesg | grep gpio-of-helper [ 1.064403] gpio-of-helper ocp:cape-universal: ready END debian@beaglebone:/var/lib/cloud9$
Thansk a lot in advance, Harke On Sun, 18 Nov 2018 at 19:19, Robert Nelson <[email protected]> wrote: > On Sun, Nov 18, 2018 at 9:14 AM Harke Smits <[email protected]> wrote: > > > > I have a BBB with a 4D Systems display cape. Boots and works fine with > Debian 2017-01-22, flashed in on board memory. I have Debian 2018-10-07 on > a uSD card. Inserting this card and booting gives the correct Debian > version, but the display does not work. All verified via LAN interface. I > checked uEnv.txt but I can not find a corresponding code line (to > enable...). Do I miss something here? What needs to be done to make this > system work, please? Thanks in advance, Harke > > Well run this command so we can see what you are actually dealing with: > > sudo /opt/scripts/tools/version.sh > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAHmciabpxrJuvW%3Dhf3vQph4FdPMKPu_fsk3uNVU2LjkPbRK8bw%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
