Bump
On Sunday, August 20, 2017 at 4:26:22 PM UTC-4, jself...@gmail.com wrote: > > Hi everyone, > > After working with the BeagleBone Black for some time, I've recently > stumbled upon the BeagleBone Blue. I'm still familiarizing myself with all > the features and capabilities, but there is one issue that I cannot seem to > find a solid answer for. > > Can you run both ESCs and servos at the same time on the BeagleBone Blue? > > I understand that servos require a larger current draw, and that ESCs > should have the middle power wire disconnected because the BEC > functionality is not needed. I also recognize that servos typically > operate around 50hz while ESC prefer something closer to 400hz. It is my > understanding that both the servo and ESC functionality is accomplished > through the same PRU hardware. With the differences in > hardware/software/timing/power, I'm concerned that it might be an > "either-or" proposition, and you cannot have both ESCs and servos operating > on the same rail. Hopefully, that's not the case. > > If running both at the same time is possible, then are there any special > considerations that I need to be aware of to make the solution work? > > Thanks. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/a063a7ce-0c34-46ae-8c3a-20248fc33c75%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.