Hi, My problem is solved and CAN is working properly. Here is what is did 1. Made changes in /boot/uEnv.txt by adding device tree overlay. 2. After rebooting up using dmsg checked whether network interface is registered or not - it is showing CAN network registered. 3. After that I just configured nete interface using sudo ip link set can0 type can bitrate xxxxxx , ip link set up can0 4. This is step what I was missing - changing pin configuration config-pin P1.26/28 can After this everything is working properly .
Thanks. 3. On Tue, Dec 25, 2018, 19:49 Drew Fustini <pdp7p...@gmail.com wrote: > Hello, are you still having this issue? > > Thanks > Drew > > On Sun, Nov 25, 2018, 13:58 <indra.lawa...@gmail.com wrote: > >> Hi, >> Last week I got my pocket beaglebone. >> I am trying CAN communication. So for that I have added CAN device tree >> overlay in uEnx.txt as I did with beaglebone enhanced. >> >> But after booting when I am setting up network interface it is not >> working. >> When I did same thing with beaglebone enhanced board it is working >> properly. >> What extra changes I need to do to make this work. >> >> I am using IoT image without GUI from official website. >> Please guide me on this. >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to beagleboard+unsubscr...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/beagleboard/88f19853-6544-4d2c-aa29-0301227ef4c8%40googlegroups.com >> <https://groups.google.com/d/msgid/beagleboard/88f19853-6544-4d2c-aa29-0301227ef4c8%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> For more options, visit https://groups.google.com/d/optout. >> > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the > Google Groups "BeagleBoard" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/beagleboard/qp2oxRPAgyU/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > beagleboard+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/CAEf4M_BYmBr4hXN-AP0auzGN7%2BGx0m67AMrYppM0GZ08NzR9Rw%40mail.gmail.com > <https://groups.google.com/d/msgid/beagleboard/CAEf4M_BYmBr4hXN-AP0auzGN7%2BGx0m67AMrYppM0GZ08NzR9Rw%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAHOnU8h%2BFu--N%3D_Wcmq2T-di2oOWr%3D4z9L4epSLyqKY1SB8CCg%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.