I did not do the hardware. I did not have much input to the hardware or UART0 would have been brought out I will forward that question.
But I beleive the board is using the Octavio SIP. Further that makes sense with what I am seeing. Power up - power LED comes up, no other LED's. I have not looked through u-boot to see when it flashes USR0-3 LEDs - but I am not seeing them so I am guessing if anything is being loaded from SD it is dying fast. My next step would be to hook up a JTAG, but there is a deadline, and the prototype will get finished on a BBBW and I will come back to the production board later. Regardless, eventually this problem needs solved. I would like to hear that if I build u-boot differently everything will be honky dory. I have alot of embedded Linux experience - but less with the BBB. I was unaware that there was u-boot in eeprom in a BBB. Is the primary loader in the am335x or Octavio SIP capable of loading u-boot from the SDcard ? If so is it possible to build u-boot to do the initialization that is not being done here ? -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/64970f45-f984-4ef9-b617-52de1f51d773%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
