> > Thank you.
I have pretty much done what you suggested - I built a custom u-boot, using patches from Mr. Nelson that assumes a BBB, I also moved the Debug Uart to Uart 4. Still no joy. Do not get to USR0 lighting up. I fired up CCS 7.4 and my Segger JLink and the CCS instructions - I Beleive for Starter-Ware, and could not get the Segger to execute code in the processor. It told me the processor was Halted, and refused to start. IF I were to continue with this board I would be putting a Scope or Logic Analyzer on the sdcard lines to see if anything at all is happening. But I spent a day at the clients with the board - and kept finding more and more assembly errors on the boards. Hopefully the guy who built the hardware is now fixing it. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/769ae4f8-d32d-4b4e-b4d8-f90ac15c34d8%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
