The BBB Clone board I am trying to get working has had sufficient work that it is now trying to load Linux.
I have u-boot patched to use UART4 as the console. I have tried to make changes to pass UART4 to linux as the console, without success. I still get debug: [console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0] ... from uboot on UART4 just before starting the kernel when I lose output Where is the console getting set to ttyO0 ? -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/204cfe7f-c2ed-432d-ae33-1763ab214c46%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
