Hi. Following link should be more helpful (check STEP 10). https://medium.com/@zageollc/updating-the-software-image-on-a-beaglebone-black-fc73ffcc700
I tried yesterday, I press 'boot mode' button and connect Power, release button after about 10 seconds. 2019년 1월 25일 금요일 오전 4시 54분 23초 UTC-6, Old Newbie 님의 말: > > I'm at a loss. > > Is it possible to boot an A6 (or A6A) revision BBB from the SD Card reader? > > The instructions I've followed from online sources, for creating u-boot > and writing out an image, don't seem to make sense in the context of my old > board. > > I'm suppose to press the boot button after powerup to switch to the SD > Card? > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/c900119d-638b-42bf-b720-e39407067e7c%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
