Hi averyone, Is it possible to change LCD data pins to another GPIO? The fact is that my cape does not allow the Beaglebone Black to boot normally, because LCD pins are used when BBB boot. Although if I connect it after boot BBB, then it works well. I tried to reconfigure the pins in the device tree so as not to touch the boot pins, but there is no signal on them. Although the cape attached in the slot. Please help me, I'v no idea, what is wrong. Here is my device tree-source: https://yadi.sk/d/VjxN_P-Vl4x9Uw
-- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/32724a79-0142-4374-8ba4-b036384bd70a%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
