i had success with a cheap stencil from oshstencil, solder paste and a reflow oven, but first i tryed without solder paste and screw a pair of IC
El jue., 31 ene. 2019 a las 14:44, evilwulfie (<[email protected]>) escribió: > > https://www.ebay.com/itm/OK-Industries-SMT-8500-SMT-Manual-Placement-Machine/123087954705?hash=item1ca89d2311:g:q4oAAOSwl4Va2L3P:rk:9:pf:0 > > yes more expensive than 500 bux, but to place that you would have a tough > time > doing it by hand unless your rock solid and no shaking. > > > > On 1/31/2019 10:34 AM, Jacek Radzikowski wrote: > > You can also ask at local laptop or phone repair shops. If they do more > than just replacing broken screens, they should have tools and expertise to > mount a BGA chip, and probably will do it much cheaper than $500. > > Jacek. > > > On Thu, Jan 31, 2019 at 12:04 PM Mark A. Yoder <[email protected]> > wrote: > >> I have a student who needs a very compact Linux system for his project. >> He's selected a Pocket Beagle and has modified the Pocket Beagle PCB to >> have a couple of additional components. The next step is to have the board >> made and mount the Octavo chip on the board. His gotten a quote of some >> $500 just to mount the chip. >> >> Ouch! >> >> So we've decided to mount the chip ourselves. We have a reflow oven and >> an x-ray machine. >> >> What suggestions do you all have that will improve the odds in getting it >> mounted the first time? >> >> Thanks... >> >> --Mark >> >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/beagleboard/2a38ab56-7eb7-442a-9dd3-5081584caaac%40googlegroups.com >> <https://groups.google.com/d/msgid/beagleboard/2a38ab56-7eb7-442a-9dd3-5081584caaac%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> For more options, visit https://groups.google.com/d/optout. >> > > > -- > Given a choice between two theories, take the one which is funnier > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/CAA2oDvYFuKQfRDVb%3D3_80tv03wbbipZO2pkxwyfup4dzfwptbA%40mail.gmail.com > <https://groups.google.com/d/msgid/beagleboard/CAA2oDvYFuKQfRDVb%3D3_80tv03wbbipZO2pkxwyfup4dzfwptbA%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > For more options, visit https://groups.google.com/d/optout. > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/157f4260-e6be-6b25-4fb8-b3756ab7f374%40gmail.com > <https://groups.google.com/d/msgid/beagleboard/157f4260-e6be-6b25-4fb8-b3756ab7f374%40gmail.com?utm_medium=email&utm_source=footer> > . > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAEObdD2pikeQj%2BFSROPwTAc6%3DkHbH98wMFo1ktNBRO2KCBAnWg%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
