Hello Seth,
Thanks for coming back to me, again.
All systems work with flashed os. No SD card inserted.
This from a non working system:
Last login: Thu Feb 7 11:18:52 2019 from
2001:982:c7c1:1:48cb:8340:1675:32fa
debian@beaglebone:~$ sudo /opt/scripts/tools/version.sh
[sudo] password for debian:
git:/opt/scripts/:[974401727fdcbd58751bd99456a7baa6bd6891a0]
eeprom:[A335BNLT00C02916BBBK1556]
model:[TI_AM335x_BeagleBone_Black]
dogtag:[BeagleBoard.org Debian Image 2018-10-07]
bootloader:[eMMC-(default)]:[/dev/mmcblk1]:[U-Boot
2018.09-00002-g0b54a51eee]:[l ocation: dd MBR]
kernel:[4.14.71-ti-r80]
nodejs:[v6.14.4]
uboot_overlay_options:[enable_uboot_overlays=1]
uboot_overlay_options:[uboot_overlay_pru=/lib/firmware/AM335X-PRU-RPROC-4-14-TI-
00A0.dtbo]
uboot_overlay_options:[enable_uboot_cape_universal=1]
pkg check: to individually upgrade run: [sudo apt install --only-upgrade
<pkg>]
pkg:[bb-cape-overlays]:[4.4.20181106.0-0rcnee0~stretch+20181110]
pkg:[bb-wl18xx-firmware]:[1.20180517-0rcnee0~stretch+20180517]
pkg:[kmod]:[23-2rcnee1~stretch+20171005]
pkg:[librobotcontrol]:[1.0.4-git20181108.0-0rcnee0~stretch+20181110]
pkg:[firmware-ti-connectivity]:[20170823-1rcnee1~stretch+20180328]
groups:[debian : debian adm kmem dialout cdrom floppy audio dip video
plugdev us ers systemd-journal i2c bluetooth netdev
cloud9ide gpio pwm eqep admin spi tisdk weston-launch
xenomai]
cmdline:[console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1
root=/dev/m mcblk1p1 ro rootfstype=ext4 rootwait
uboot_detected_capes=BB-BONE-LCD4-01, coher ent_pool=1M
net.ifnames=0 quiet]
dmesg | grep pinctrl-single
[ 1.130498] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size
568
dmesg | grep gpio-of-helper
[ 1.142379] gpio-of-helper ocp:cape-universal: ready
END
I did perform the github comand.
This is from a working system:
debian@beaglebone:~$ sudo /opt/scripts/tools/version.sh
[sudo] password for debian:
git:/opt/scripts/:[1aa73453b2c980b75e31e83dab7dd8b6696f10c7]
eeprom:[A335BNLT00C00816BBBK0459]
model:[TI_AM335x_BeagleBone_Black]
dogtag:[BeagleBoard.org Debian Image 2018-10-07]
bootloader:[eMMC-(default)]:[/dev/mmcblk1]:[U-Boot
2018.09-00002-g0b54a51eee]:[location: dd MBR]
kernel:[4.14.71-ti-r80]
nodejs:[v6.14.4]
uboot_overlay_options:[enable_uboot_overlays=1]
uboot_overlay_options:[uboot_overlay_addr4=/lib/firmware/BB-I2C1-00A0.dtbo]
uboot_overlay_options:[uboot_overlay_pru=/lib/firmware/AM335X-PRU-RPROC-4-14-TI-00A0.dtbo]
uboot_overlay_options:[enable_uboot_cape_universal=1]
pkg check: to individually upgrade run: [sudo apt install --only-upgrade
<pkg>]
pkg:[bb-cape-overlays]:[4.4.20181120.0-0rcnee0~stretch+20181120]
pkg:[bb-wl18xx-firmware]:[1.20180517-0rcnee0~stretch+20180517]
pkg:[kmod]:[23-2rcnee1~stretch+20171005]
pkg:[librobotcontrol]:[1.0.4-git20181108.0-0rcnee0~stretch+20181110]
pkg:[firmware-ti-connectivity]:[20170823-1rcnee1~stretch+20180328]
groups:[debian : debian adm kmem dialout cdrom floppy audio dip video
plugdev users systemd-journal i2c bluetooth netdev cloud9ide gpio pwm eqep
admin spi tisdk weston-launch xenomai]
cmdline:[console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1
root=/dev/mmcblk1p1 ro rootfstype=ext4 rootwait
uboot_detected_capes=BB-BONE-LCD4-01,BBORG_MOTOR, coherent_pool=1M
net.ifnames=0 quiet]
dmesg | grep pinctrl-single
[ 1.132913] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size
568
[ 1.601249] pinctrl-single 44e10800.pinmux: pin PIN19 already requested
by 48302200.pwm; cannot claim for gpio_keys
[ 1.612024] pinctrl-single 44e10800.pinmux: pin-19 (gpio_keys) status -22
[ 1.619036] pinctrl-single 44e10800.pinmux: could not request pin 19
(PIN19) from group pinmux_bb_lcd_keymap_pins on device pinctrl-single
dmesg | grep gpio-of-helper
[ 1.144987] gpio-of-helper ocp:cape-universal: ready
END
debian@beaglebone:~$
I hope two examples are enough for the diagnosis. A third ystem, working
good, is gone with his owner, who needed it obviously. The systems are not
100% identical, but my knowledge of Debion/BBB is too limited to understand
its implications.
Many thanks in advance,
Harke
On Thu, 7 Feb 2019 at 06:40, Mala Dies <[email protected]> wrote:
>
> Hello,
>
> Seth here, again. Are you running your board(s) w/ SD Card or on the eMMC
> of the BBBs? I know this is happening over and over again but my ideas
> remain the same. Try to, if you are using SD Card, update your eMMC or
> erase the contents of the eMMC.
>
> U-Boot overlays need to be updated. If you are using the eMMC on all the
> BBBs, I will think of something else.
>
> Seth
>
> P.S. Please list the info. from this command: sudo ./version.sh | grep
> bootloader. First apply a *git pull* in /opt/scripts/tools/developers/
> directory. For each board, please reply w/ the version of your bootloader.
> You can label them 1. to 4. w/ the relevant info.
>
>
>
> On Tuesday, February 5, 2019 at 3:41:10 AM UTC-6, Harke Smits wrote:
>>
>> Hello,
>>
>> I have a strange LXQT autostart problem. I have 4 BBB's all running the
>> latest image (Debian 9.5). My python application runs fine on all of them
>> (from QTerminal). On two of these systems I can make LXQT-Autostart my
>> application work (LXQT settings-Session settings-Application Autostart,
>> under LXQT Autostart). On the other two nothing runs automatically. The
>> .desktop files are all the same, their names as well. I tried everything I
>> could think of, I even re-installed the image. No luck. This already took
>> me days. Please help me out or give me a pointer where to look.
>> Thanks a lot.
>> Harke .
>>
> --
> For more options, visit http://beagleboard.org/discuss
> ---
> You received this message because you are subscribed to a topic in the
> Google Groups "BeagleBoard" group.
> To unsubscribe from this topic, visit
> https://groups.google.com/d/topic/beagleboard/SdeWndpLKck/unsubscribe.
> To unsubscribe from this group and all its topics, send an email to
> [email protected].
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/beagleboard/c148bf97-d9c9-4d23-850b-362c9ce586b6%40googlegroups.com
> <https://groups.google.com/d/msgid/beagleboard/c148bf97-d9c9-4d23-850b-362c9ce586b6%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
> For more options, visit https://groups.google.com/d/optout.
>
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/CAHmciabnNeoeOCboEZxU27c6q89kfZ3aLNeK9apQ51sjkOc8xQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
